SB87 SOLID BRASS SURFACE BOLT
SB87 Series Solid Brass Surface Bolts
Usually Ships in 1–3 Business Days
The Cal-Royal SB87 Series Solid Brass Surface Bolt provides manually operated surface-mounted bolting for a compatible door and frame. Choose a 3-, 4-, 6-, or 12-inch nominal length and one of six architectural finishes. The surface-mounted arrangement is useful where an accessible manual bolt is preferred, subject to suitable backing, strike alignment, and the opening's requirements.
Practical Uses
- Paired doors: Consider for retaining an inactive leaf where manual surface bolting is appropriate.
- Supplemental bolting: Add a manually operated securing point to a compatible door, without assuming a forced-entry rating.
- Replacement work: Compare the actual bolt body, fixing pattern, and strike arrangement with existing preparation.
Everyday example: On a pair of interior doors, an installer selects an SB87 length that can be reached comfortably and positions the strike to suit the inactive leaf's closed position. After securing both parts to sound material, the installer checks that the bolt enters fully and retracts without needing to lift or push the door into alignment.
Installation Guidance
Choose the actual size: The series includes SB873, SB874, SB876, and SB8712. Confirm the supplied model and its mounting layout before marking holes; nominal length does not establish bolt throw or screw spacing.
Match the strike to the opening: Check the door/frame relationship and intended bolt direction. Select the appropriate supplied strike arrangement and verify sufficient clearance and engagement.
Anchor into sound backing: Check that the door and frame can support the fixing. Thin skins, damaged wood, or trim alone should not be assumed suitable.
Align without forcing: Close and align the door before setting the strike. The bolt should travel freely into the receiver and retract completely before the door moves.
Consider operation: Position the manual control where the intended user can reach it. Confirm that added bolting is appropriate for the opening and does not obstruct required release.
Test after fastening: Cycle the bolt and door several times, check screw security, and correct binding or door sag independently.
Problems It Helps Address
- An inactive leaf needs a manual retaining point: Provides surface-mounted bolting on a compatible opening.
- A bolt must suit the available layout: Offers four nominal lengths for selection.
- Visible hardware needs coordinating: Offers six finish choices.
Product Details
- Series: SB87; manufacturer models SB873, SB874, SB876, SB8712
- Selectable nominal lengths: 3, 4, 6, and 12 inches
- Construction: Solid brass
- Operation: Manual surface bolt
- Listed packaging: Packed individually, poly-bagged with two strikes and screws
- Listed standard reference: BHMA L04151; confirm suitability for the project's requirements
- Selectable finishes: US10B-Antique Bronze Oiled, US15-Satin Nickel, US15A-Blackened Satin Nickel, US26-Bright Chrome, US3-Bright Brass, US5-Antique Brass
Selection tip: Confirm actual dimensions, fixing locations, strike fit, and supplied components before ordering. A surface bolt is not a door closer, and no load, forced-entry, or complete-opening compliance rating is established here.