ALUMINUM KICKPLATES W/ SCREWS 10x34
ANO Aluminum Kickplates with Screws
Usually Ships: 1-3 Business Days
The Cal-Royal ANO Aluminum Kickplates add a protective metal surface to the lower face of a compatible door, helping reduce everyday scuffs from shoes and incidental contact. These 0.032"-thick anodized aluminum plates are offered in three heights, each 34" wide, with screws included. Choose US15-Satin Nickel or US10B-Antique Bronze Oiled from this listing.
Choose the Correct ANO Part Number
- ANO634: 0.032" thick x 6" high x 34" wide; select “6 x 34.”
- ANO834: 0.032" thick x 8" high x 34" wide; select “8 x 34.”
- ANO1034: 0.032" thick x 10" high x 34" wide; select “10 x 34.”
Select the coverage: The manufacturer identifies the plate sizes as height x width. Select the coverage height needed and confirm the 34" width fits the actual door face.
Practical Uses
- Busy interior doors: Protect a compatible lower door surface where shoes and routine traffic leave marks.
- Office and service-area renovations: Add a coordinated protective face to a sound door after checking hardware and clearances.
- Replacement work: Replace a matching plate after comparing size, thickness, and actual hole pattern.
Everyday example: A stockroom door repeatedly picks up shoe marks near its bottom edge. An appropriately sized ANO plate covers the contact area and gives routine cleaning a metal surface to work on, while the installer checks that the plate and screws clear the frame and adjacent hardware.
Installation and Fit Checks
Measure before ordering: Check the usable flat door face, bottom clearance, frame stops, seals, and nearby hardware. Do not assume a 34" plate fits every nominal door width or that an existing plate shares its hole pattern.
Prepare a sound surface: Repair loose or damaged door material first. A kickplate covers and protects the surface; it does not restore a weakened door or provide a structural repair.
Check screw length and substrate: Verify the supplied ANO screws and suitable fastening depth for the actual door construction. Use the applicable instructions and actual plate to confirm hole layout before drilling.
Position and fasten carefully: Use the actual plate to verify mounting locations. Follow the applicable installation guidance, avoid overtightening and distorting the thin plate, and check door operation after fitting. Do not drill or modify a specially rated assembly without confirming its permitted preparation.
Problems It Helps Address
- Repeated lower-door scuffing: Adds a protective surface in the selected coverage area.
- Worn appearance from daily contact: Provides a coordinated metal face on an otherwise sound door.
- Unclear size selection: Model-specific height and width references help distinguish the three options.
Product Details
- Series: ANO
- Material: Anodized aluminum
- Thickness: 0.032"
- Widths and heights: 34" wide; 6", 8", or 10" high
- Offered finishes: US15-Satin Nickel and US10B-Antique Bronze Oiled; finish names do not change the aluminum base material
- Fasteners: Screws included; verify suitability for the door construction
- Manufacturer standards reference: ANSI/BHMA A156.6
Application note: This is a surface-protection plate, not an impact-rated barrier or a security reinforcement. The series catalog discusses optional UL-labeled plates; that does not establish that the selected ANO option includes a UL label or approves every installation on a fire-rated door. Confirm the exact supplied configuration and opening requirements.