BARM .050 Stainless Steel Armor Plates

Write A Review
Regular price $134.50
Sale price $134.50 Regular price $0.00
Unit price
-US32D-Satin Stainless Steel
Ask a question

Ask a Question

* Required fields

Size guide Share

BARM .050-Inch Stainless Steel Armor Plates

Usually Ships: 1-3 Business Days

Our BARM Stainless Steel Armor Plates add a broad protective surface to the lower portion of a door. Made from .050-inch stainless steel with a US32D Satin Stainless Steel finish, these plates help shield the covered door face from routine scuffs and contact in busy circulation areas. Choose BARM3434, 34 inches high x 34 inches wide, or BARM3436, 34 inches high x 36 inches wide, to suit the measured opening and desired coverage.

Protection for Working Doors

  • Service corridors: Protect the covered door surface where cleaning equipment, carts, and supplies are regularly moved.
  • Commercial back-of-house areas: Add a replaceable protective layer at door faces exposed to everyday contact.
  • Facility maintenance: Help reduce repeated refinishing of the covered area while retaining a coordinated satin stainless appearance.
  • Renovation and replacement work: Select the plate footprint after checking the existing door, attachment pattern, and nearby hardware.

Everyday example: A maintenance team notices repeated scuff marks on a service-corridor door from carts passing through the opening. After measuring the leaf and checking hardware clearance, the team chooses the BARM size that covers the affected area without extending into the door's operating clearances. The plate protects the covered surface; it does not correct a dragging door, misaligned closer, or cart route that repeatedly strikes the opening.

Sizes and Finish

  • Plate thickness: .050 inch stainless steel
  • BARM3434: 34 inches high x 34 inches wide
  • BARM3436: 34 inches high x 36 inches wide
  • Finish: US32D Satin Stainless Steel
  • Standard reference: ANSI/BHMA J101

Choose the plate size, not simply the nominal door width. Measure the actual installation area and allow for the door edge, frame stops, bottom clearance, and adjacent components. Verify the height and width orientation before ordering, especially when replacing an existing plate or covering previous fixing holes.

Installation Planning

  • Inspect the substrate: Confirm the door face is sound and suitable for the proposed attachment method.
  • Check clearances: Ensure the plate does not interfere with the frame, threshold, seals, pulls, locks, hinges, or other hardware.
  • Confirm fasteners: Check the supplied hardware and select attachment suitable for the actual door construction. Verify screw penetration before drilling.
  • Prepare the layout: Check the actual plate and correct model reference before marking holes. Do not transfer an old hole pattern without confirming alignment.
  • Complete a function check: After mounting, verify secure attachment, safe exposed edges, and free closing and latching.

UL-Labeled Ordering Option

A UL-listed label is available as an ordering option for armor plates larger than 16 inches and up to 48 inches in height. The ordering format adds UL before the part number, for example ULBARM3434 US32D. Do not assume that selecting a standard BARM size on this page supplies the labeled version. Confirm the required labeled configuration before ordering for a rated opening.

The correct plate, labeling, attachment, and installed arrangement must be checked for the specific door assembly. An armor plate alone does not establish the rating or compliance of the complete opening.

Care and Routine Checks

Clean with methods suitable for satin stainless steel and avoid abrasive treatment that changes the finish. During maintenance, check for loose attachment, raised edges, trapped debris, and interference with seals or moving hardware. If damage continues, inspect the door operation and traffic pattern as well as the protective plate.

Product Reference

BARM3434 and BARM3436 Armor Plate Cut Sheet

BARM3434 Armor Plate Template