18-Gauge Galvanized Steel 2-Panel Doors – 1900 Series - www.calroyalhardware.com
18-Gauge Galvanized Steel 2-Panel Doors – 1900 Series - www.calroyalhardware.com

DKS 18-Gauge Galvanized Steel 2-Panel Doors – 1900 Series

Write A Review
Regular price $675.00
Sale price $675.00 Regular price
Unit price
Ask a question

Ask a Question

* Required fields

 Share

DKS 1900 Series 18-Gauge Galvanized Steel 2-Panel Doors

Our DKS 1900 Series 2-panel doors combine an embossed panel appearance with 18-gauge galvanized steel construction and a full-body polystyrene core. The non-handed design, reinforced hardware locations, and factory-applied grey epoxy primer make this series a practical choice for coordinated commercial door openings.

Practical Uses

  • Commercial interiors: Choose a two-panel appearance for offices, corridors, and other openings where a plain flush door is not the desired look.
  • Replacement projects: Match the selected door size and hardware preparation to the existing frame and approved hardware schedule.
  • Sound-rated openings: The standard 1900 Series has an STC rating of 28; the separately identified Model 32-1900 has an STC rating of 32.

Everyday example: For an office renovation, select the required height and lock preparation before ordering, then coordinate the hinges, closer, and frame so the finished opening has the panel appearance you want and hardware that fits correctly.

Fit and Preparation

This listing offers size selections 3068, 3070, and 3080, with cylindrical, mortise blank, cylindrical/deadlock, CA ADA cylindrical/deadlock, and blank reinforced preparation choices. Not every size and preparation combination appears in the DKS product guide; confirm the exact configuration and availability before ordering.

  • Size coordination: Verify the required door dimensions, frame opening, finished floor, threshold, and undercut before selecting a size.
  • C: Cylindrical lock preparation.
  • MB: Mortise blank preparation.
  • CDL: Cylindrical lock with deadlock at 5-1/2-inch center-to-center spacing.
  • CA ADA CDL: CA ADA cylindrical/deadlock preparation. Confirm hardware locations against the project requirements.
  • BR: Blank reinforced preparation.
  • Hardware coordination: Match hinge locations, lock templates, strike preparation, and closer mounting to the approved hardware schedule.

Hinge Locations by Door Size

The following are the DKS-row hinge-location dimensions in the manufacturer's Door Hinge Cross Reference Chart. Dimensions are in inches, referenced from the top of the door as illustrated in that chart. A, B, C, and D identify successive hinge locations. Use the linked drawing to match its measurement points before comparing an existing door or frame.

  • 3068: A = 7-3/8 inches; B = 37-5/16 inches; C = 67-1/4 inches.
  • 3070: A = 7-3/8 inches; B = 39-5/16 inches; C = 71-1/4 inches.
  • 3080: A = 7-3/8 inches; B = 32-11/16 inches; C = 58 inches; D = 83-5/16 inches.

View the DKS hardware-location reference drawing for 3068, 3070, and 3080 doors (PDF). Coordinate lock locations with the selected preparation and approved hardware template; do not substitute hinge measurements for lock centerlines.

Installation Guidance

Install only in a frame that is plumb, level, square, securely anchored, and correctly sized. Support the door while hanging it, use the specified hinge fasteners, and check for a free swing and proper latch engagement before adjusting the closer. Protect the door from moisture and jobsite damage, and keep labels visible. For labeled openings, verify the supplied door label and compatible frame and hardware, and follow the manufacturer's installation instructions before making field modifications.

Problems It Helps Address

  • Plain-door appearance: The embossed two-panel design provides a defined architectural appearance.
  • Hardware mounting needs: Dedicated closer and hinge reinforcements provide prepared mounting locations for compatible hardware.
  • Ordering mismatches: Multiple lock preparations allow the door to be coordinated with the intended hardware when the correct configuration is selected.

Product Details

  • Series: DKS 1900 Series, 2-panel hollow metal door.
  • Face material: 18-gauge galvanized steel.
  • Core: Full-body polystyrene.
  • Edges: Seamless filled edges with edge/corner seam construction; continuous laser welding on both edges.
  • Handing: Non-handed design.
  • Closer reinforcement: 12-gauge steel.
  • Hinge reinforcement: 7-gauge, standard/heavy duty.
  • Top cap: 16-gauge galvanized flush top cap.
  • Bottom cap: 16-gauge galvanized inverted bottom cap.
  • Bottom rail: 10-inch minimum ADA bottom rail.
  • Standard preparation families: 161, 161-DL, Fed 86 edge, and panic bar reinforcement, subject to the selected configuration.
  • Fire and smoke listing: DKS specifies WHI/ITS ratings up to 3 hours, positive pressure, and “S” smoke. Verify the rating and label supplied for the exact opening configuration.
  • Sound rating: STC 28 for the standard 1900 Series; STC 32 applies specifically to Model 32-1900 and is not implied for every selection.
  • Standards: DKS specifies that the series meets or exceeds ANSI 250.4 and ANSI 250.8.

Available Finish

Factory-applied, baked-on grey two-part epoxy primer. Coordinate any finish painting with the manufacturer's painting instructions and project requirements.

Manufacturer Documents

Shipping Information

⚠ This product ships via LTL (Less Than Truckload) freight due to its size and weight. Shipping costs are not calculated at checkout. After placing your order, a member of our team will contact you with a freight quote for your approval before shipment. For shipping inquiries prior to ordering, please contact us.