BB14031 2 SH140 4.5" X 4.5" SPRING HINGE - Cal Royal Hardware
2 SH140 4.5" X 4.5" SPRING HINGE
BB14031 2 SH140 4.5" X 4.5" SPRING HINGE - Cal Royal Hardware
2 SH140 4.5" X 4.5" SPRING HINGE

BB14031 2 SH140 4.5" X 4.5" SPRING HINGE

Write A Review
Regular price $45.00
Sale price $45.00 Regular price $0.00
Unit price
-US10B-Antique Bronze Oiled
-US15-Satin Nickel
-US26-Bright Chrome
-US26D-Satin Chrome
-US4-Satin Brass
-USP-Primed Gray
Ask a question

Ask a Question

* Required fields

Size guide Share

BB14031 Combination Hinge Set: Two Spring Hinges and One Ball-Bearing Hinge

Usually Ships: 1-3 Business Days

The Cal-Royal BB14031 combines two NEWSH140 spring hinges with one BB31 two-ball-bearing hinge in a three-piece set for a compatible single-acting door. Each hinge is 4-1/2" x 4-1/2" with .134" leaf thickness. The spring hinges provide adjustable closing force, while the ball-bearing hinge supports smooth pivoting without adding spring tension.

Practical Uses

  • Office and residential doors: Add spring-assisted closing where the door size, weight, frame, and opening requirements suit this combination.
  • Closet or utility-room openings: Help return a compatible door toward its closed position rather than relying on someone to pull it shut.
  • Replacement projects: Replace a matching three-hinge arrangement after checking mortises, hole patterns, leaf thickness, clearances, and required closing performance.

Everyday example: After carrying supplies through a utility-room door, the adjusted spring hinges help bring it back toward the frame. The installer checks that it closes and latches reliably under actual conditions without excessive opening effort.

Installation and Adjustment

Full-mortise mounting: Both leaves are recessed, one into the door and one into the frame. Confirm the 4-1/2" height, 4-1/2" open width, .134" leaf thickness, corner shape, hole locations, and door/frame reinforcement before installation. This is standard-weight hinge hardware, not a blanket heavy-door or high-frequency-service recommendation.

Match the supplied components: The current catalog identifies the spring hinges as NEWSH140 and the bearing hinge as BB31. Keep the hinge axes aligned and ensure the door swings freely before applying spring tension. Do not use stronger tension to compensate for binding, loose screws, or misaligned mortises.

Adjust with care: The manufacturer's guide calls for the adjustment head upward and the door closed during adjustment. Use the specified tension-adjusting rod and tension-set pin, follow the illustrated procedure, and test closing force after each adjustment. Follow the supplied hardware's limits; avoid releasing a loaded spring mechanism without control.

Check real closing conditions: Test from different opening positions with the actual latch, seals, and air pressure present. Spring hinges do not provide the hydraulic speed and latch control of a door closer. A hinge set alone does not guarantee positive latching or acceptable opening force.

Problems It Helps Address

  • A door left open after use: Adjustable spring action helps return a properly fitted door toward closed.
  • Mixed component selection: One set combines two spring hinges and one bearing hinge in the listed size and thickness.
  • Unnecessary pivot friction: The BB31 bearing hinge supports smooth movement within an appropriately selected installation.

Opening suitability: Select the hinge arrangement for the actual door weight, width, height, use frequency, and environmental conditions. The manufacturer's general selection guidance is not an unconditional load rating for every BB14031 installation. For a labeled fire-door opening, verify the approved hinge arrangement, labels, self-closing/latching requirements, and complete assembly before use.

Product Details

  • Set part number: BB14031, sold per set
  • Contents: Two NEWSH140 single-acting spring hinges and one BB31 two-ball-bearing hinge
  • Size of each hinge: 4-1/2" high x 4-1/2" wide when open
  • Leaf thickness: .134"
  • Mounting: Full mortise, template-style preparation
  • Material: Catalog lists steel and stainless steel configurations; confirm the base material of the ordered finish rather than assuming both are included
  • Fasteners: Machine and wood screws supplied as listed; confirm sizes against the actual assembly because the catalog and spring-hinge drawing differ
  • Packaging: One combination set per inner box

Offered Finishes

US10B-Antique Bronze Oiled, US15-Satin Nickel, US26-Bright Chrome, US26D-Satin Chrome, US4-Satin Brass, and USP-Primed Gray. Finish names do not establish solid-brass or stainless-steel construction throughout.

Manufacturer Instructions, Reference Drawing, and Catalog