BB350 3.5" X 3.5" SWING CLEAR 2BB HINGE
BB350 3-1/2-Inch Swing-Clear Two Ball Bearing Hinge
Usually Ships: 1-3 Business Days
Our BB350 Swing-Clear Hinge uses an offset arrangement to move the door out of the opening as it swings to 90 degrees, helping reduce the obstruction created by the open door leaf. This 3-1/2-inch, square-corner, full-mortise hinge has two ball bearings and is designed for non-beveled-edge doors. Its standard-weight construction and .123-inch leaf thickness must be matched to the actual door and preparation.
Where Swing-Clear Hinges Help
- Busy passageways: Help move the open door leaf away from the passage where carts, equipment, and people pass through.
- Interior door upgrades: Evaluate swing-clear operation when a conventional hinge leaves the door projecting into the opening.
- Replacement projects: Match the square-corner mortise, offset geometry, thickness, and screw pattern rather than selecting on height alone.
- Finish coordination: Select a listed finish to complement the other visible door hardware.
Everyday example: A facilities team finds that a small equipment cart repeatedly catches the edge of an open door. Before selecting BB350, the installer verifies the door's non-beveled edge, square-corner preparation, and surrounding swing space. After installation, the team measures the usable opening with the door at 90 degrees and checks the closer, stop, and nearby trim. The hinge changes the door's position; it does not widen the frame itself.
Fit and Operation
Swing-clear geometry: The offset changes the path of the door. Check the actual door thickness, jamb profile, trim, and adjacent wall before ordering. Do not assume the same clearance gain on every opening.
Full-mortise mounting: Both leaves are recessed, one into the door and one into the frame. Check the actual hinge against the prepared recesses and confirm leaf seating, screw positions, and axis alignment.
Square-corner selection: BB350 is the square-corner model. A rounded mortise needs the appropriate matching hinge or approved preparation work; nominal size alone does not establish interchangeability.
Finish Options
- US26D Satin Chrome
- US10B Antique Bronze Oiled
- US15 Satin Nickel
- US26 Bright Chrome
- US3 Bright Brass
- US4 Satin Brass
Select the required finish from the product options. Confirm the exact supplied base material where exposure conditions or a project specification makes that distinction important.
Installation Checks
- Review the door: Confirm height, weight, construction, non-beveled edge, and frequency of use before choosing the hinge set.
- Use the correct geometry: Compare the BB350 drawing with the actual door and frame before drilling or cutting.
- Support the door: Secure it during replacement and verify the frame attachment is sound.
- Select suitable fasteners: The template references six #10 x 1-inch wood screws and six #10-24 x 1/2-inch machine screws. Use the appropriate type for the actual preparation.
- Check surrounding hardware: Confirm the closer, stop, seals, and trim accommodate the revised swing path.
- Test the installed opening: Check free movement, clear opening at the intended angle, secure attachment, and reliable latching.
Product Details
- Part number: BB350
- Nominal listed size: 3-1/2 inches x 3-1/2 inches
- Leaf thickness: .123 inch
- Type: Swing clear, full mortise
- Bearing arrangement: Two ball bearings
- Weight class: Standard weight
- Corner style: Square
- Door-edge application: Non-beveled
Maintenance and Project Coordination
Check attachment, alignment, and clearances periodically. Use cleaning and lubrication methods suitable for the supplied finish and bearings. Investigate rubbing or binding across the complete opening instead of assuming a hinge alone will correct a misaligned frame or damaged door.
Verify required opening dimensions and accessibility requirements for the actual installed assembly. A swing-clear hinge alone does not establish compliance. Confirm any rated-opening requirements and any specified non-removable-pin option before ordering.