3 SOLID BRASS RIGID DOOR STOP
3 SOLID BRASS RIGID DOOR STOP

SBRS3 3" SOLID BRASS RIGID DOOR STOP

Write A Review
Regular price $6.25
Sale price $6.25 Regular price $0.00
Unit price
US10B-Antique Bronze Oiled
US15-Satin Nickel
US15A-Satin Nickel Blackened
US26-Bright Chrome
US26D-Satin Chrome
US3-Bright Brass
US5-Antique Brass
Ask a question

Ask a Question

* Required fields

Size guide Share

SBRS3 3" Solid Brass Rigid Door Stop

The Cal-Royal SBRS3 Solid Brass Rigid Door Stop provides a fixed, rubber-tipped contact point to help keep a compatible swinging door or its hardware from striking a nearby surface. The SBRS3 combines a solid brass body with screw mounting and is packed with both white and black rubber tips, allowing a choice of contact-tip color.

Practical Uses

Consider the SBRS3 for suitable interior openings where a short projecting rigid stop can meet the door before the lever, trim, or door edge reaches the wall. Check the full swing path and hardware projection before selecting a mounting location. The listed 3" nominal projection alone does not establish a suitable fit.

Choose from seven architectural finishes to coordinate with nearby hardware: US10B-Antique Bronze Oiled, US15-Satin Nickel, US15A-Satin Nickel Blackened, US26-Bright Chrome, US26D-Satin Chrome, US3-Bright Brass, and US5-Antique Brass.

Installation and Replacement

Position the stop where its rubber tip will meet a suitable contact area on the door before other hardware strikes the wall. Avoid glass, delicate trim, and unsupported panels. Confirm that the mounting surface provides adequate support for the screw and that the installed stop will not create interference elsewhere in the swing.

The manufacturer drawing identifies a double-threaded wood screw, and the existing listing specifies a 1" mounting-screw reference. Use the SBRS3 template and actual product to establish preparation. Confirm the supplied screw and suitable pilot-hole preparation for the mounting material; thin trim or an unsupported wall surface may not provide a secure fixing.

For replacement work, inspect the existing mounting hole and surrounding material. A stripped or enlarged hole may require a properly supported new location. Fit the chosen rubber tip securely, then open the door slowly to verify alignment and clearance. Check that the stop remains secure during normal use.

Problems It Helps Address

  • Hardware striking nearby surfaces: Establishes a stopping point when projection and placement are appropriate.
  • Hard contact at the stop: The rubber tip cushions contact; it does not guarantee silent operation or a mark-free surface.
  • Missing or worn rigid stops: Offers a replacement option where mounting and contact geometry match.
  • Tip-color and finish coordination: Included white and black tips and seven finish choices provide appearance options.

At an interior room doorway, a correctly positioned SBRS3 lets the door meet the rubber tip rather than allowing the handle to knock directly into the wall. Choose the tip color that suits the setting, then check the projection and screw support so the stop works as intended in everyday use.

Product Details

  • Part number: SBRS3
  • Type: Rigid door stop
  • Body material: Solid brass
  • Mounting: Screw attachment; manufacturer drawing identifies a double-threaded wood screw
  • Listed nominal projection: 3"
  • Listed mounting-screw reference: 1"
  • Included contact-tip colors: White and black rubber tips
  • Finish choices: US10B, US15, US15A, US26, US26D, US3, and US5, as named above

Dimensional Check Before Ordering

The manufacturer identifies the SBRS3 as a 3" solid brass rigid stop, while its dimensional drawing includes a 3-1/8" overall length reference. Do not assume the nominal size and drawing reference are identical installed-projection measurements.

Confirm the current product's installed projection and screw dimensions before ordering for tight clearances or matching existing preparation. Use the applicable drawing and actual product for installation rather than scaling a printed page.

Operating Considerations

The SBRS3 is a rigid contact stop, not a flexible spring stop, hydraulic buffer, door closer, or hold-open device. It does not regulate door speed. Inspect the rubber tip and screw mounting during routine maintenance, and address uncontrolled door movement separately rather than relying on the stop to absorb every impact.

Mounting Template

SBRS3 Solid Brass Rigid Door Stop Mounting Template

Product Cutsheet and Dimensional Reference

View SBRS3 Manufacturer Cutsheet