BB52454 4 1/2" X 4" HEAVY WEIGHT 4 BB
BB52454 4-1/2-Inch x 4-Inch Heavy-Weight Four Ball Bearing Hinge
Our BB52454 Heavy-Weight Four Ball Bearing Hinge combines 4-1/2-inch height x 4-inch open width with .180-inch leaf thickness in a full-mortise template format. Use it where the hardware schedule calls for this heavy-weight bearing configuration, checking the complete door application rather than choosing on hinge height alone.
Practical Applications
- Commercial entrances and corridors: Coordinate a heavy-weight hinge set with the actual door and operating demands.
- Frequently used doors: Evaluate door weight, frequency, construction, and closer forces together.
- Maintenance replacements: Match the existing leaf width, thickness, mortise, and screw pattern before ordering.
- New installations: Prepare the door and frame for the correct model and project schedule.
Everyday example: A contractor replaces hinges on a commercial door prepared for 4-1/2-inch x 4-inch leaves. Before selecting BB52454, the installer checks its .180-inch thickness against the recess and verifies sound frame reinforcement. Once the complete set is fitted, the door is tested for even gaps, free movement, closing, and latching. A hinge with the same height but a different width or thickness would require its own fit check.
Dimensions and Installation Format
Open width: The 4-inch width is measured across the leaves with the hinge open, not across one leaf. Compare both dimensions with the actual opening.
Full mortise: One leaf sits in a recess in the door edge and the other in the frame. Check the .180-inch thickness, hole pattern, and required clearance before cutting or modifying either preparation.
Heavy-weight bearings: The four-ball-bearing arrangement is part of the specified hinge construction. It does not establish a universal door-weight limit or guarantee suitability for every high-traffic opening.
Available Finish Options
- US32D Satin Stainless Steel
- US10A
- US26 Bright Chrome
- US26D Satin Chrome
- US3 Bright Brass
- US4 Satin Brass
- USP Primed Gray
Select the required finish and confirm the exact supplied base material where exposure conditions or the project schedule requires it. Do not assume the standard selection supplies a marine-grade or NRP version.
Installation Checks
- Check the complete door: Review height, width, weight, construction, use frequency, and closer requirements.
- Compare the correct drawing: Verify the actual hinge against the BB52454 template before machining or drilling.
- Support the door: Secure the leaf during removal and installation.
- Verify attachment: Confirm sound wood or metal reinforcement and suitable fasteners with sufficient engagement.
- Align the hinge set: Seat leaves correctly and align the axes to prevent binding.
- Test operation: Check gaps, swing, closing, and latching with the complete hardware installed.
Problems It Helps Address
- A project calls for heavy-weight bearing hinges: Provides the specified four-bearing format in a defined size.
- Replacement preparations vary: Identifies the 4-inch open width and .180-inch leaf thickness for comparison.
- Visible hardware must coordinate: Offers seven listed finish selections.
Product Details
- Part number: BB52454
- Size: 4-1/2 inches high x 4 inches open width
- Leaf thickness: .180 inch
- Construction: Heavy weight, four ball bearing
- Mounting: Full mortise, template format
Maintenance and Project Coordination
Inspect fastener security, alignment, and movement periodically. Use cleaning and lubrication methods appropriate for the supplied finish and bearing assembly. Investigate continuing sagging or scraping across the door, frame, and closer rather than expecting hinge replacement alone to correct structural or preparation problems.
Confirm required quantities and any specified non-removable-pin configuration before ordering. NRP uses a retaining set screw to help prevent pin removal while the door is closed. For rated openings, verify the exact supplied hinge and installation against the complete assembly requirements.