HMBB4100 4 1/2"HALF MORTISE STANDARD WT. HINGE
HMBB4100 4-1/2-Inch Half-Mortise Standard-Weight Ball-Bearing Hinge
Our HMBB4100 is a 4-1/2-inch half-mortise hinge with a standard-weight ball-bearing design. The specialty hinge catalog specifies .134-inch gauge and a non-removable pin. Match the exact leaf arrangement and preparation to the door and frame before ordering or fitting.
Documented Configuration
- Model: HMBB4100.
- Nominal size: 4-1/2 inches.
- Mounting type: Half mortise.
- Weight class: Standard weight.
- Bearing design: Ball bearing.
- Gauge: .134 inch.
- Corner reference: Square corner in the matching model drawing.
- Pin arrangement: Non-removable pin, identified as N.R.P. in the catalog.
Available Finish Choices
- US26D: Satin Chrome.
- US10A: Select by the listed project finish code.
- USP: Primed Gray.
The catalog includes steel and stainless-steel family material references. Confirm the exact supplied material and finish configuration for the selected item. Do not assume every family material is available through every finish selection.
Half-Mortise Preparation
A half-mortise hinge uses different mounting arrangements at the door and jamb. Follow the exact HMBB4100 drawing to identify each leaf and its preparation. The nominal height alone does not establish interchangeability with full-mortise, full-surface, or half-surface hinges.
Non-removable pin: N.R.P. describes a pin-retention arrangement intended to resist ordinary pin removal. It does not replace secure door and frame fastening or establish a forced-entry rating for the complete opening.
Practical Uses
- Specified half-mortise openings: Coordinate the hinge with the door schedule and mounting arrangement.
- Replacement work: Compare leaf placement, hole locations, and clearances with the installed hardware.
- Maintenance planning: Confirm standard-weight suitability and the required hinge quantity for the actual door and usage.
Everyday example: An installer is replacing a half-mortise hinge. They confirm the HMBB4100 model, inspect the door and jamb support, and compare the preparation with the matching drawing. After securing the correct fasteners and aligning all hinge axes, they cycle the door to check clearances, smooth movement, closing, and latching.
Installation Checks
- Review the application: Confirm door size, weight, usage frequency, closer loads, and required hinge count.
- Check preparation: Identify the door and jamb leaves and match the exact hole pattern.
- Inspect support: Confirm suitable reinforcement and receiving material at the mounting points.
- Verify fasteners: The template references #12 x 1-1/4-inch wood screws and #12-24 x 1/2-inch machine screws. Confirm the supplied kit and actual substrate requirements.
- Align carefully: Keep the hinge axes aligned and avoid drawing misaligned parts together with the screws.
- Test operation: Check the full swing and reliable closing and latching after fitting.
Problems It Helps Address
- A half-mortise hinge needs replacement: Provides an exact model and drawings for fit comparison.
- The schedule calls for ball-bearing support: Supplies the documented standard-weight design.
- Pin retention is specified: Includes the cataloged non-removable-pin arrangement.
Ordering and Care
Confirm exact finish, material, purchase quantity, fastening package, and preparation before purchase. Catalog box quantities are packing references, not confirmation of the quantity included in a selected order.
Inspect mounting security, bearing condition, and alignment periodically. Follow cleaning and maintenance guidance appropriate for the supplied hinge and finish. Confirm any rated-opening conditions against the complete assembly; no universal fire rating or door-weight capacity is established by this description.
Matching Documents
Usually Ships: 1-3 Business Days