NEWSH454 4-1/2x4 SPRING HINGE - Cal Royal Hardware
NEWSH454 4-1/2x4 SPRING HINGE - Cal Royal Hardware

NEWSH454 4-1/2x4 SPRING HINGE

Write A Review
Regular price $22.50
Sale price $22.50 Regular price $0.00
Unit price
-US10A
-US15-Satin Nickel
-US26-Bright Chrome
-US26D-Satin Chrome
-US3-Bright Brass
-US32D-Satin Stainless Steel
-US4-Satin Brass
-USP-Primed Gray
Ask a question

Ask a Question

* Required fields

Size guide Share

NEWSH454 4-1/2" x 4" Commercial Spring Hinge

Usually Ships: 1-3 Days

The Cal-Royal NEWSH454 is a single-acting, full-mortise, standard-weight commercial spring hinge. Adjustable spring action helps return a compatible swinging door toward its closed position. The manufacturer catalog specifies 4-1/2" height x 4" open width and .134" leaf thickness.

Practical Uses

  • Office and utility-room doors: Add closing assistance where the complete hinge arrangement suits the door and opening requirements.
  • Compatible commercial interior openings: Help return a door after someone passes through, without assuming the speed control of a hydraulic closer.
  • Replacement work: Replace matching 4-1/2" x 4" spring hinges after comparing mortises, screw locations, barrel clearance, and closing requirements.

Everyday example: After an employee carries supplies through a utility-room doorway, the adjusted springs help return the door toward the frame. During installation, the complete opening is tested to confirm reliable closing and latching without unnecessary opening effort.

Installation and Adjustment

Check size and preparation: Both leaves are mortised, one into the door and one into the frame. Verify the 4-1/2" x 4" dimensions and .134" leaf thickness, corner shape, hole pattern, and reinforcement before ordering or cutting. NEWSH454 is not the same size as the 4-1/2" x 4-1/2" NEWSH140.

Select the complete hinge arrangement: Consider door weight, width, height, frequency of use, seals, latch resistance, and air pressure. The manufacturer advises using ball-bearing or concealed-bearing hinges when combining ordinary support hinges with spring hinges. Standard-weight commercial classification does not establish suitability for every heavy or high-frequency door.

Align before tensioning: Mount the hinges with their axes aligned and check that the door swings freely. The installation guide specifies the adjustment head upward and the door closed during adjustment. Follow its illustrated tension-adjusting rod and set-pin procedure, keeping the loaded mechanism controlled. Test after each adjustment and observe the limits supplied with the hardware.

Confirm fasteners: The NEWSH454 drawing lists #11 x 1-1/4" wood screws and M5 x 1/2" screws, while the commercial spring-hinge catalog lists #12 x 1-1/4" wood screws and 12-24 x 1/2" machine screws. Verify the supplied hardware, frame threads, and hole pattern rather than treating these screw types as interchangeable. Drawing counts do not establish a guaranteed per-hinge package quantity.

Test actual performance: Check closing and latching from several opening positions with the actual seals and latch installed. Correct sag, rubbing, and strike misalignment separately. Do not increase tension to overcome a binding door.

Problems It Helps Address

  • Doors left open after use: Spring force assists return toward closed on a properly fitted opening.
  • Closing force that needs adjustment: Adjustable tension helps tune the complete hinge arrangement.
  • Replacement uncertainty: The model-specific drawing helps compare mounting details before altering the door or frame.

Closing assistance, not hydraulic control: Spring hinges do not provide separate hydraulic closing-speed and latch-speed adjustments and are not door stops. The hinge alone does not guarantee positive latching, acceptable opening force, or suitability for a labeled fire-door assembly. Verify any special requirements and the approved complete configuration.

Product Details

  • Part number: NEWSH454
  • Type: Commercial, single-acting spring hinge
  • Mounting: Full mortise, cataloged as template type
  • Weight classification: Standard weight
  • Catalog size: 4-1/2" high x 4" wide when open
  • Leaf thickness: .134"
  • Material: Catalog lists steel and stainless steel configurations; confirm the base material of the ordered finish
  • Packaging reference: Manufacturer catalog lists two pieces per box. Confirm the selling quantity for this listing before assuming an order quantity of one includes two hinges.

Offered Finishes

US10A, US15-Satin Nickel, US26-Bright Chrome, US26D-Satin Chrome, US3-Bright Brass, US32D-Satin Stainless Steel, US4-Satin Brass, and USP-Primed Gray. The US10A selection is retained as listed without assigning an unverified finish description. Plated finish names do not establish solid-brass construction.

Manufacturer Instructions, Drawing, and Catalog