BBRC45 4.5x 4 BALL BEARING HINGE - Cal Royal Hardware
BBRC45 4.5x 4 BALL BEARING HINGE - Cal Royal Hardware

BBRC45 4.5x 4 BALL BEARING HINGE

Write A Review
Regular price $5.80
Sale price $5.80 Regular price $0.00
Unit price
-DURO
-US1-Matte Black
-US10A
-US10B-Antique Bronze Oiled
-US15-Satin Nickel
-US15A-Satin nickel Blackened
-US26-Bright Chrome
-US26D-Satin Chrome
-US3-Bright Brass
-US32D-Satin Stainless Steel
-US4-Satin Brass
-US5-Antique Brass
-USP-Primed Gray
Ask a question

Ask a Question

* Required fields

Size guide Share

BBRC45 Full-Mortise Two Ball Bearing Hinge with 1/4-Inch Radius Corners

Usually Ships: 1-3 Days

Our BBRC45 Ball Bearing Hinge provides standard-weight, full-mortise construction with two ball bearings, .130-inch leaf thickness, and 1/4-inch-radius round corners. Its catalog and model-specific drawing specify a 4-inch height x 4-inch open width. Match the actual hinge and preparation before ordering, and select a listed finish to coordinate with your door hardware.

Practical Applications

  • Commercial interiors: Use where the project calls for a standard-weight two-bearing hinge with this preparation.
  • Round-corner replacements: Match the 1/4-inch radius, open dimensions, thickness, and attachment pattern.
  • Hardware renovations: Coordinate finishes across the opening while retaining the required hinge configuration.
  • New preparation: Recess both leaves using the correct model layout and actual supplied hinge.

Everyday example: A contractor replaces hinges on an office door with rounded recesses. Before choosing BBRC45, the installer measures the actual hinge height and open width, checks the 1/4-inch corner radius, and confirms the .130-inch mortise depth. The complete set is then fitted and tested for free swing, closing, and latching. Measuring the preparation avoids treating every round-corner hinge as interchangeable.

Fit Details

4 inches high x 4 inches open width: Width is measured across the open leaves rather than across a single leaf. Verify both dimensions with the actual door and frame.

1/4-inch-radius corners: The corner shape must match the prepared recess. A 5/8-inch-radius or square-corner hinge may need a different preparation.

Full mortise: One leaf sits in the door-edge recess and the other in the frame recess. Check leaf seating, .130-inch thickness, screw positions, and axis alignment.

Finish Options

  • DURO
  • US1 Matte Black
  • US10A
  • US10B Antique Bronze Oiled
  • US15 Satin Nickel
  • US15A Satin Nickel Blackened
  • US26 Bright Chrome
  • US26D Satin Chrome
  • US3 Bright Brass
  • US32D Satin Stainless Steel
  • US4 Satin Brass
  • US5 Antique Brass
  • USP Primed Gray

Confirm the required finish in the selector. Where base material or exposure resistance is specified, verify the exact supplied configuration rather than relying on finish appearance alone.

Installation Guidance

  • Review the application: Check door height, width, weight, construction, use frequency, and closer requirements.
  • Compare the preparation: Measure the actual opening and compare the correct BBRC45 drawing before cutting or drilling.
  • Support the door: Secure it during removal and fitting.
  • Choose suitable screws: The exact template references eight #12 x 1-inch wood screws and eight #12-24 x 1/2-inch machine screws. Use the appropriate type for the actual preparation.
  • Align the hinge set: Ensure leaves seat properly and axes align without forcing the door into position.
  • Test operation: Check door gaps, free swing, closing, and latching after installation.

Problems It Helps Address

  • A round-corner hinge needs replacement: Identifies the specific radius, size, and leaf thickness for comparison.
  • The project requires bearing hinges: Provides a two-ball-bearing standard-weight option.
  • Finishes need coordination: Offers thirteen listed selections.

Product Details

  • Part number: BBRC45
  • Documented open size: 4 inches high x 4 inches wide
  • Leaf thickness: .130 inch
  • Corner radius: 1/4 inch
  • Construction: Standard weight, two ball bearing
  • Mounting: Full mortise

Care and Project Coordination

Inspect attachment, alignment, and movement during maintenance. Use cleaning and lubrication methods suitable for the supplied finish and bearings. Investigate recurring rubbing or sagging across the complete door and frame.

Confirm required hinge quantities and any specified non-removable-pin option before ordering. NRP uses a retaining set screw to help prevent pin removal while the door is closed. Verify rated-opening requirements against the exact supplied configuration and complete assembly rather than assuming hinge selection alone establishes compliance.

Technical References

Commercial Hinges Catalog, BBRC45 Specifications

BBRC45 Round-Corner Hinge Template