SBDH41300 5" SOLID BRASS KICK DOWN DOOR HOLDER
SBDH41300 5-Inch Solid Brass Kick-Down Door Holder
Usually Ships in 1–3 Business Days
The Cal-Royal SBDH41300 is a nominal 5-inch solid-brass kick-down door holder for suitable openings where manual hold-open use is permitted. Its listed grooved vinyl-rubber foot contacts the floor when lowered; holding depends on correct mounting height, door conditions, and the actual floor surface.
Practical Uses
- Temporary manual hold-open: Keep a suitable door open while moving supplies or passing through.
- Replacement work: Compare mounting geometry, arm reach, and floor contact with the existing holder.
- Finish coordination: Select from six architectural finishes to suit nearby door hardware.
Everyday example: While moving cartons through a suitable interior doorway, a staff member opens the door and lowers the holder so its foot contacts the floor. After the move, the arm is raised clear before the door closes. The installation is checked first to confirm hold-open use is permitted and the foot grips the actual floor.
Installation Guidance
Confirm permitted hold-open use: Check the opening's required closing and exit functions before adding a manually engaged holder. Do not use it to defeat required self-closing operation.
Check floor contact: Compare the undercut, floor level, door position, and actual arm geometry. A nominal 5-inch size does not establish a universal mounting height.
Use suitable backing: Verify sound attachment material or reinforcement at the door mounting position. Check the current drawing and actual parts before marking holes.
Set the operating position: Position the holder so the lowered foot contacts the floor correctly and the raised arm clears the floor throughout door travel.
Test and release: Test holding on the actual floor without relying on a claimed universal non-slip effect. Raise the arm before moving the door and check that required closing operation is restored.
Inspect the foot: Keep the contact area clean and check wear, loose fixings, or poor grip during maintenance.
Problems It Helps Address
- A suitable doorway needs temporary manual holding: Provides a kick-down floor-contact arrangement.
- A worn holder needs replacement: Model-specific references support reach and mounting checks.
- Floor-contact parts wear: The listing identifies RUBSBDH as the rubber-foot reference; verify replacement suitability separately.
Product Details
- Part number: SBDH41300
- Manufacturer identity: Nominal 5-inch solid-brass kick-down holder
- Listed contact foot: Black/grey vinyl rubber with concentric grooves
- Listed rubber-foot reference: RUBSBDH
- Listed standard reference: ANSI/BHMA A156.16 L11383
- Selectable finishes: US26D-Satin Chrome; US10B-Antique Bronze Oiled; US26-Bright Chrome; US10-Satin Bronze; US3-Bright Brass; US4-Satin Brass
Selection tip: Verify attachment, arm clearance, and floor grip before ordering. This manually released holder is not a closer, automatic-release hold-open device, or door-speed control.