BB5254 5 x 4 HEAVY WEIGHT 4 BALL BEARING HINGE

Write A Review
Regular price $21.10
Sale price $21.10 Regular price $0.00
Unit price
-US26D-Satin Chrome
-US32D-Satin Stainless Steel
-US10A
-USP-Primed Gray
Ask a question

Ask a Question

* Required fields

Size guide Share

BB5254 5-Inch x 4-Inch Heavy-Weight Four Ball Bearing Hinge

Our BB5254 Heavy-Weight Four Ball Bearing Hinge provides a 5-inch height x 4-inch open width and .190-inch leaf thickness for commercial projects specifying this hinge format. Its full-mortise template construction places one leaf in the door edge and the other in the frame, with four ball bearings supporting movement at the hinge. Choose a listed finish and match the complete hinge set to the actual door, preparation, and operating requirements.

Practical Applications

  • Commercial entrances and corridors: Use where the hardware schedule specifies heavy-weight four-bearing hinges.
  • Frequently operated doors: Coordinate hinge selection with door weight, construction, traffic, and closer forces.
  • Replacement work: Compare both open dimensions, leaf thickness, recess depth, and screw positions before selecting a replacement.
  • New door preparation: Use the exact model reference and actual hinge to establish the required mortises and attachment.

Everyday example: A maintenance team replaces hinges on a service-corridor door that uses a 5-inch-high hinge with a 4-inch open width. The installer checks the BB5254's .190-inch leaf against the existing mortise and verifies reinforcement on both sides. After fitting the hinge set, the team checks free movement, even gaps, closing, and latching. The correct fit matters as much as selecting a heavy-weight bearing type.

Dimensions and Fit

5 inches high x 4 inches open width: Width is measured across both leaves with the hinge open, not across a single leaf. A different open width can change the fit even when the hinge height matches.

.190-inch leaf thickness: Check the actual recess depth and door clearances. Do not treat a thicker leaf as a direct replacement for a thinner hinge without reviewing the preparation.

Full-mortise mounting: Both leaves sit in recesses. Correct seating, axis alignment, and secure attachment are essential to prevent rubbing or binding.

Available Finish Options

  • US26D Satin Chrome
  • US32D Satin Stainless Steel
  • US10A
  • USP Primed Gray

Confirm the finish in the selector. Where the project has environmental-exposure or base-material requirements, verify the exact supplied configuration rather than relying on finish appearance alone.

Installation Guidance

  • Review the complete application: Check door height, width, weight, construction, use frequency, and closer requirements.
  • Confirm the layout: Compare the actual hinge and BB5254 template with the door and frame before drilling or machining.
  • Support the door: Secure it while removing and fitting hinges.
  • Check attachment: Select fasteners appropriate for the wood or metal preparation and verify sound backing and adequate engagement.
  • Align the set: Seat the leaves correctly and keep hinge axes aligned.
  • Test operation: Check clearances, swing, closing, and latching with all hardware in place.

Problems It Helps Address

  • The project calls for a heavy-weight bearing hinge: Provides four ball bearings in the specified full-mortise format.
  • Replacement dimensions need confirmation: Identifies both open size and leaf thickness for comparison.
  • Hardware finishes must coordinate: Offers four listed finish selections.

Product Details

  • Part number: BB5254
  • Size: 5 inches high x 4 inches open width
  • Leaf thickness: .190 inch
  • Weight class: Heavy weight
  • Bearings: Four ball bearings
  • Mounting: Full mortise, template format

Care and Project Coordination

Inspect fastener security, alignment, and movement during routine maintenance. Use cleaning and lubrication methods suitable for the supplied finish and bearings. Investigate recurring sagging, scraping, or binding across the complete door and frame rather than assuming hinge replacement alone solves the cause.

Confirm required hinge quantities and any specified non-removable-pin configuration before ordering. NRP uses a retaining set screw to help prevent pin removal while the door is closed; do not assume it is included in a standard finish selection. For rated openings, verify the exact supplied hinge and installation against the complete door assembly requirements.

Technical References

Commercial Hinges Catalog, BB5254 Specifications

BB5254 Heavy-Weight Hinge Template