5x 5 CONCEALED BALL BEARING HINGE
5x 5 CONCEALED BALL BEARING HINGE

BB2255 5x 5 CONCEALED BALL BEARING HINGE

Write A Review
Regular price $16.80
Sale price $16.80 Regular price $0.00
Unit price
-US10A
-US10B-Antique Bronze Oiled
-US26D-Satin Chrome
-US32D-Satin Stainless Steel
Ask a question

Ask a Question

* Required fields

Size guide Share

BB2255 5-Inch x 5-Inch Concealed Ball Bearing Hinge

Usually Ships: 1-3 Days

Our BB2255 Concealed Ball Bearing Hinge provides a 5-inch x 5-inch full-mortise format with bearings concealed within the hinge assembly. It suits projects specifying this hinge size and bearing arrangement, with both leaves recessed into matching door and frame preparations. Select the finish that coordinates with the opening, then verify the complete hinge specification against the actual door and hardware requirements.

Practical Applications

  • Commercial door installations: Use where the project calls for a 5-inch concealed-bearing full-mortise hinge.
  • Replacement work: Compare the existing hinge footprint, recess depth, hole pattern, and edge geometry before choosing a replacement.
  • Hardware refreshes: Coordinate the hinge finish with locks, pulls, and other visible fittings.
  • Door preparation: Establish the required mortises and attachment using the correct supplied hinge and approved project details.

Everyday example: During a corridor-door refurbishment, an installer finds that the existing opening uses 5-inch hinges. The team checks the BB2255's open dimensions, recess depth, fastener pattern, and suitability for the door's weight and closer before ordering. Once fitted, the installer tests the full swing and closing cycle, rather than assuming matching height alone guarantees a successful replacement.

Full-Mortise Fit

Open hinge dimensions: The nominal size is 5 inches high x 5 inches wide. Width is measured across the open leaves, not across a single leaf.

Recessed leaves: Full mortise means one leaf is fitted into the door edge and the other into the frame. Measure the actual leaf thickness and confirm the required recess before machining. The preparation must let the leaves seat correctly without causing the door to bind or changing its operating gaps.

Finish Selections

  • US10A
  • US10B Antique Bronze Oiled
  • US26D Satin Chrome
  • US32D Satin Stainless Steel

Confirm the required finish in the selector. Where base material, corrosion exposure, or a rated assembly specification matters, check the exact supplied configuration rather than choosing by finish name alone.

Installation Guidance

  • Specify for the complete door: Check height, width, weight, construction, frequency of operation, and closer or spring-hinge requirements.
  • Confirm hinge quantity: Use the project's hinge schedule and actual door conditions. Do not treat catalog packaging as the required quantity for every door.
  • Check the preparation: Verify recess depth, screw pattern, backing, and alignment on both door and frame.
  • Support the door: Secure it before removing old hinges and while fitting the new set.
  • Choose suitable attachment: Match fasteners to the substrate and approved preparation, with adequate engagement into sound material or reinforcement.
  • Inspect operation: Confirm the hinge axes align and the door swings, closes, and latches without rubbing or binding.

Problems It Helps Address

  • Hinges need replacement: Offers a concealed-bearing option for openings that match its specification.
  • Replacement size is unclear: Clearly identifies the 5-inch open format and full-mortise mounting.
  • Visible finishes need coordination: Provides four listed finish selections for the opening.

Product Details

  • Part number: BB2255
  • Nominal open size: 5 inches high x 5 inches wide
  • Mounting: Full mortise
  • Bearing arrangement: Concealed ball bearing

If non-removable pins are required, confirm an NRP configuration before ordering rather than assuming it is standard. NRP uses a retaining set screw to help prevent pin removal while the door is closed. For rated openings, verify the exact hinge and installation against the complete door-assembly requirements.

Care and Reference

Periodically check attachment, alignment, and free movement. Use cleaning and lubrication methods appropriate for the supplied finish and bearing assembly. Investigate sagging, scraping, and binding as door-system issues rather than repeatedly tightening hardware without addressing the cause.

Commercial Hinges Catalog, BB2255 Concealed Bearing Hinge Reference