MB86S-M86R BRASS FLUSHBOLT
MB86S / MB85R Solid Brass Flush Bolts
The Cal-Royal MB86S and MB85R Solid Brass Flush Bolts are manually operated flush bolts for securing a suitable inactive door leaf to a prepared strike. Choose Square for MB86S or Round for MB85R to match the door preparation. The listed 6-inch body, 3/4-inch width, 1/2-inch bolt-head diameter, and 1-inch throw provide key references for checking fit.
Practical Uses
- Inactive leaves of paired doors: Manually secure a suitable leaf at its prepared bolt location.
- Replacement projects: Match the square- or round-end preparation, body dimensions, and strike alignment before ordering.
- Coordinated hardware: Select from eight listed finishes to complement the surrounding hardware.
Everyday example: At a suitable pair of interior doors, the inactive leaf remains bolted while the active leaf is used normally. When the full opening is needed, the user manually retracts the required bolts before moving the inactive leaf, then closes and rebolts it after use.
Installation Guidance
Match the end shape: Check the selected Square or Round option against the actual recess. Similar body dimensions do not guarantee identical preparation.
Check the door construction: Confirm sufficient material and appropriate reinforcement at the bolt location before mortising or drilling.
Align the strike: Position the strike and receiving hole so the bolt reaches full engagement without forcing the leaf out of alignment. Check clearance through the complete door swing.
Verify the supplied fastening: The listing includes a strike and fasteners. Confirm the actual contents and suitability for the door and receiving material before installation.
Operate manually: The deep cup finger opening and double-action spring retain the bolt in its projected or retracted position. This is not automatic flush-bolt operation; retract the bolt before moving the leaf.
Check project requirements: Confirm that manual flush bolts are permitted for the complete opening and its intended use. A listed component reference does not establish approval of the assembled door system.
Problems It Helps Address
- An inactive leaf needs manual securing: Provides bolt-and-strike engagement when properly installed.
- A worn existing flush bolt: Offers square- and round-end choices for preparation matching.
- A bolt must stay in the selected position: The double-action spring retains the projected or retracted setting.
Product Details
- Square-end model: MB86S
- Round-end model: MB85R
- Construction: Solid brass
- Listed length: 6 inches
- Listed width: 3/4 inch
- Listed bolt-head diameter: 1/2 inch
- Listed throw: 1 inch
- Operation: Deep cup finger opening with double-action spring
- Listed contents: Strike and fasteners
- Listed standard reference: BHMA L04201
Available Finishes
- US1-Matte black
- US10B-Antique bronze oiled
- US15-Satin nickel
- US15A-Satin nickel Blackened
- US26-Bright Chrome
- US26D-Satin Chrome
- US3-Bright brass
- US5-Antique Brass
Selection tip: Compare the correct model drawing, end shape, body preparation, and strike position before ordering. Confirm the quantity and bolt locations required for the complete door pair rather than assuming one bolt supplies the entire arrangement.