9800 Surface Vertical Rod
Usually Ships: 1-3 Business Days
A9860V & AF9860V 9800 Series Surface Vertical Rod Exit Devices
The Cal-Royal A9860V & AF9860V 9800 Series Surface Vertical Rod Exit Devices provide Grade 1 touch-bar hardware with surface-mounted vertical rods for compatible commercial and institutional openings. Choose the A9860V panic configuration or AF9860V fire exit configuration to match the opening's requirements. These are surface vertical rod devices, not rim or concealed vertical rod devices.
Practical Uses
Consider this series for suitable openings in institutions, schools, universities, and commercial buildings where heavy-duty vertical rod exit hardware is specified. It offers a replacement option where the device, rod arrangement, strikes, and door preparation are compatible. The existing specifications identify retrofit applications for Sargent 8800 Series using 9800 escutcheon trim; verify the full preparation and trim arrangement rather than assuming a direct fit.
The listed size selections are 24" x 84", 32" x 84", 36" x 84", and 48" x 96", each labeled RHR or LHR. Fire Rated and Non-Fire Rated selections are available. Match the actual door width, height, handing, and manufacturer's sizing requirements before ordering.
Installation and Replacement
Use the instructions and templates matching the panic or fire exit configuration. Standard door thickness is 1-3/4", with 2-1/4" listed as optional. The stated minimum stile width is 3-3/4" for single-door applications and 3-1/2" for double-door applications, with a 2-3/4" backset. Verify these requirements against the exact device, trim, and opening preparation.
Check the mounting locations for the device, rods, top and bottom chassis, and strikes before drilling. Adjust the rod and latch arrangement according to the manufacturer so the door closes and latches without binding. The specific vertical rod features describe a handed device that is field-reversible; select RHR or LHR correctly rather than relying on the broader series' generic non-handed wording.
Wood and machine screws are furnished, and thru-bolts are standard with fire-rated devices. After fitting, test touch-bar operation and top and bottom latching through repeated door cycles. For fire-labeled openings, follow all applicable listed assembly requirements, including any auxiliary hardware required for the configuration. Allen-key dogging is standard on non-fire-labeled devices only.
Problems It Helps Address
- Worn surface vertical rod hardware: Provides a replacement option where the device, rods, strikes, and preparation match.
- Demanding daily traffic: ANSI A156.3 Grade 1 construction supports commercial and institutional use.
- Door-height and handing selection: Clearly labeled width/height and RHR/LHR choices help purchasers select the appropriate configuration.
- Existing 161 cutout coverage: The cover is described as covering the standard hollow metal door cutout; verify the complete preparation.
- Different opening requirements: Separate panic and fire exit selections support specifying the appropriate model.
At a busy opening, occupants operate the touch bar while the rod mechanism releases the latching points. Correct adjustment matters just as much as the hardware selection: if the door drags, binds, or fails to latch at either end, inspect the rods, strikes, door alignment, and closer as a complete system.
Product Details
- Part numbers: A9860V panic and AF9860V fire exit surface vertical rod devices
- Grade: ANSI A156.3, Grade 1
- Listed sizes: 24" x 84", 32" x 84", 36" x 84", and 48" x 96"
- Handing selections: RHR and LHR; field-reversible as instructed
- Rating selections: Fire Rated and Non-Fire Rated
- Finishes: US32D satin stainless steel, US1 matte black, US32 bright stainless steel, US3 bright brass, and US10B antique bronze oiled
- Door thickness: 1-3/4" standard; 2-1/4" optional
- Minimum stile width: 3-3/4" single-door applications; 3-1/2" double-door applications, subject to configuration
- Backset: 2-3/4"
- Top and bottom chassis: Non-ferrous alloy for panic grade; steel for fire grade
- Cover, rail assembly, and end caps: Brass, bronze, or stainless steel, depending on configuration
- Latch bolts and springs: Stainless steel
- Rail movement: Travels in the direction of door swing
- Mounting hardware: Wood and machine screws; thru-bolts standard on fire-rated devices
- Dogging: Allen-key type standard on non-fire-labeled devices; cylinder dogging listed as available
Series Options and Performance Considerations
The existing series information lists outside lever, thumbpiece, and escutcheon trims, alarm options, electrical latch retraction (ELR), and RX and LX signal switches. Trims are described as thru-bolted, with Grade 1 lever and escutcheon construction, clutch on rose trims, and rigid escutcheon trims covering a 161 cutout. Optional antimicrobial coating is listed for US32D under part number ANTB-EXIT. These are series capabilities, not confirmation of included options. Verify the ordered package contents and required strikes.
The existing specifications identify UL and ULC panic and fire exit listings and reference UL10C and UBC 7-2-1997. The vertical rod features describe AF9860V fire exit applications on pairs up to 8' x 10' for up to 3-hour labeled installations; broader series text also mentions 8' x 8' pairs. Verify the exact selected model, door size, swing arrangement, and current listing rather than applying a general series maximum to every configuration.
The series is described as ADA compliant with a stated 5 lb opening-force specification. The suggested architect's specifications call for touch-bar operation over two-thirds of the clear opening width, stainless steel springs, chassis-mounted construction, and Grade 1 hardware. Confirm the complete installed opening against the project's requirements; the device alone does not establish accessibility or the assembly's fire rating.
Installation Instructions
- A9860V Surface Vertical Rod Installation Instructions
- F9860V Fire Exit Vertical Rod Installation Instructions
Preparation Templates
- A9860V Surface Vertical Rod Template
- AF9860V Fire Exit Vertical Rod Template
- 9860 Top and Bottom Chassis Template
Use the documents matching the selected model; do not substitute panic-device preparation for fire exit hardware without manufacturer confirmation.