ANGSTRK ANGLE STRIKE - Cal Royal Hardware
ANGSTRK ANGLE STRIKE - Cal Royal Hardware

ANGSTRK ANGLE STRIKE

Write A Review
Regular price $4.25
Sale price $4.25 Regular price $0.00
Unit price
-US10B-Antique bronze oiled
-US15-Satin nickel
-US15A-Satin nickel Blackened
-US26-Bright Chrome
-US3-Bright brass
-US5-Antique Brass
Ask a question

Ask a Question

* Required fields

Size guide Share

ANGSTRK Angle Strike

Usually Ships: 1-3 Business Days

The Cal-Royal ANGSTRK Angle Strike provides an angled receiving point for a compatible bolt installation. Its solid brass base and choice of architectural finishes make it an option for replacement or new work where the strike shape, bolt travel, and mounting surface match. Screws are packed with the strike.

Practical Uses

  • Compatible surface-bolt installations: Provide a receiving point where an angled strike suits the door and frame arrangement. Check the bolt manufacturer's requirements before selection.
  • Replacement work: Replace a missing or damaged matching angle strike after comparing the opening, mounting holes, and clearances.
  • Finish coordination: Choose a finish to complement nearby hardware without assuming that similar-looking parts share the same preparation.

Everyday example: A closet's surface bolt no longer enters its damaged strike cleanly. Before ordering ANGSTRK, the installer checks the bolt size, travel, and mounting geometry. With a confirmed fit and sound mounting surface, the replacement provides a receiving point without requiring the bolt to be forced into place.

Installation and Fit Checks

Match the bolt first: Compare the actual bolt's cross-section, projection, direction of travel, and required engagement with the manufacturer drawing. Do not assume ANGSTRK is a universal strike for cylindrical locks, mortise locks, or every surface bolt.

Check alignment with the door closed: Position the strike so the compatible bolt enters freely and engages as intended. Correct door sag or underlying alignment problems rather than using the strike to force the door into position.

Verify the mounting surface: Check that the frame or other intended substrate is sound and suitable for fastening. The drawing specifies two #7 x 1-inch wood screws; confirm supplied hardware and substrate suitability before installation. Do not assume these screws are appropriate for hollow metal, masonry, or damaged wood.

Measure before drilling: Verify actual hole spacing and compare the supplied strike and mounting holes with the applicable drawing before ordering for existing holes or preparing new ones. Check door clearance, bolt operation, and screw security after fitting. Use the drawing's dimensions rather than assuming a printed or on-screen image is full size.

Dimensions and Product Details

  • Part number: ANGSTRK
  • Type: Angle strike
  • Listed base material: Solid brass
  • Fasteners: Packed with screws; drawing identifies two #7 x 1-inch wood screws
  • Manufacturer drawing reference: 2-3/16-inch overall dimension; consult the applicable drawing and actual part for opening, profile, and mounting geometry

Problems It Helps Address

  • A missing or damaged matching strike: Supplies a replacement receiving component when dimensions and application match.
  • Poor bolt engagement caused by an unsuitable strike: Offers an angled arrangement for a verified compatible installation.
  • Visible finish mismatch: Provides architectural finish choices for coordination.

Application limits: A strike alone does not establish a security rating, correct a failing frame, or guarantee compatibility with a lock or bolt. Confirm the complete hardware assembly's requirements before use on an opening with special performance requirements.

Available Finishes

US10B-Antique Bronze Oiled; US15-Satin Nickel; US15A-Satin Nickel Blackened; US26-Bright Chrome; US3-Bright Brass; US5-Antique Brass.

Manufacturer Documents