CFS20 COMMERCIAL FLOOR STOP W/OUT HOOK
CFS20 Commercial Floor Stop without Hook
Ships in 1-3 Business Days
The Cal-Royal CFS20 is a floor-mounted door stop without a hook. It provides a defined contact point to limit a compatible door's opening travel before the door or its hardware reaches a nearby wall or fixture. The existing listing specifies a 2" base diameter and nominal 3" overall height; compare the manufacturer drawing and actual part before installation.
Practical Uses
- Office and service-area doors: Establish a stopping point before a lever or door contacts an adjacent surface.
- Openings without a suitable wall-stop position: Use floor mounting where the substrate, door contact area, and clearances permit it.
- Replacement projects: Replace a matching floor stop after checking its footprint, height, contact location, and anchorage.
Everyday example: An office door opens toward a wall behind it. A correctly positioned CFS20 contacts a suitable area of the door before the lever reaches the wall. Because this model has no hook, it stops travel rather than retaining the door in the open position.
Installation and Placement
Check the full swing: Identify a suitable door contact location and confirm the stop acts before the door hits an obstruction or exceeds the permitted travel of its hinges or closer. Check bottom clearance and any lower rail or panel geometry.
Keep circulation clear: Avoid placing the stop where it creates a trip hazard or obstructs required clear space. Select the position for the actual opening, not merely the easiest drilling location.
Check the floor: Identify the substrate and concealed services before drilling. The drawing shows an expansion sleeve and threaded bolt with expander cone, a double-threaded wood screw, and a #8 x 1" wood screw with plastic anchor. Confirm which fastening arrangement applies to the supplied version and actual floor rather than assuming every illustrated piece is installed together.
Verify before fastening: Check the supplied base, anti-rotation arrangement, drilling locations, and anchor requirements against the applicable manufacturer guidance. Illustrated anchors are not a guarantee of suitability for every concrete, tile, wood, or hollow substrate.
Test gently: Confirm secure mounting and correct door contact before normal use. Recheck fastening if the stop loosens or the door begins contacting another surface.
Problems It Helps Address
- Door or lever contact with nearby surfaces: Provides a stopping point when correctly positioned.
- No practical wall mounting location: Offers a floor-mounted alternative where conditions permit it.
- Uncertain replacement fit: Model-specific documents help compare the mounting envelope and contact height.
Product Details and Specification Checks
- Part number: CFS20
- Type: Commercial floor stop without hook
- Existing nominal size: 2" base diameter x 3" overall height
- Offered finishes: US26D-Satin Chrome; US10B-Antique Bronze Oiled; US3-Bright Brass
- Existing standards references: ANSI A156.16, BHMA L12131, FED SPEC 1328E; confirm current documentation for the exact supplied configuration
A stop, not a closer or holder: CFS20 limits travel. It does not control speed throughout the swing, close the door, guarantee protection from every impact, or hold the door open. No universal impact, fire, or accessibility approval is established for the complete installation.