COMMERCIAL GRADE FLOOR DOOR STOP
COMMERCIAL GRADE FLOOR DOOR STOP

3CFS-85 COMMERCIAL GRADE FLOOR DOOR STOP

Write A Review
Regular price $16.60
Sale price $16.60 Regular price $0.00
Unit price
US26D-Satin Chrome
US10B-Antique Bronze Oiled
Ask a question

Ask a Question

* Required fields

Size guide Share

3CFS-85 Commercial Grade Floor Door Stop

Ships in 1-3 Business Days

The Cal-Royal 3CFS-85 is a floor-mounted door stop with a solid cast brass body and three mounting holes. It provides a defined stopping point for a compatible swinging door, helping keep the door and its hardware from reaching nearby walls or fixtures. Choose US26D-Satin Chrome or US10B-Antique Bronze Oiled to coordinate with the opening.

Practical Uses

  • Office and shared interior doors: Limit travel before the lever or door contacts a nearby wall.
  • Openings without a suitable wall-stop location: Position a floor stop where the door can make proper contact.
  • Replacement projects: Replace an existing floor stop after checking contact height, footprint, mounting pattern, and floor construction.

Everyday example: An office door opens toward a wall behind it. A correctly positioned 3CFS-85 contacts the door before its lever reaches the wall, helping reduce repeated contact marks without relying on the lever as the stopping point.

Installation and Placement

Check the swing first: Move the door through its intended opening range and identify a structurally suitable contact location. Check floor clearance and the door's lower rail or other suitable contact area. Confirm the stop acts before adjacent hardware or the door hits an obstruction.

Keep circulation clear: Avoid placing the stop where people are likely to trip or where it obstructs required clear space. Check the complete opening's requirements before choosing its location.

Verify the substrate: Inspect the floor for concealed services and confirm that the anchor method suits the actual material. Supplied anchors are not a guarantee of suitability for every floor. Do not drill until the location and fastening method are established.

Use the actual base: Confirm all three hole locations against the supplied hardware and applicable manufacturer drawing. Secure the stop according to the supplied instructions and test door contact gently before normal use.

Check replacement fit: Verify actual base diameter, overall height, contact location, and supplied fasteners before ordering or matching existing holes. Use the applicable drawing and actual product to establish preparation.

Problems It Helps Address

  • Door or lever contact with nearby surfaces: Provides a stopping point when positioned correctly.
  • No appropriate wall mounting surface: Offers floor-mounted placement where the substrate and clearances permit it.
  • Replacement uncertainty: A model-specific drawing helps check footprint and contact height before work begins.

A stop, not a closer: 3CFS-85 limits travel; it does not regulate door speed, prevent every impact, close the door, or hold it open. Do not use a floor stop to force a door beyond the permitted travel of its hinges or closer.

Product Details

  • Part number: 3CFS-85
  • Type: Commercial-grade floor door stop
  • Listed body material: Solid cast brass
  • Mounting: Three holes; verify actual base and supplied fasteners before drilling
  • Listed standards references: ANSI A156.16, BHMA L12131, and FED SPEC 1328E; confirm current documentation for the exact supplied configuration rather than treating these as a blanket installation approval
  • Offered finishes: US26D-Satin Chrome and US10B-Antique Bronze Oiled

Manufacturer Cutsheet and Drawing