EP23 EDGE PULL - Cal Royal Hardware
EP23 EDGE PULL - Cal Royal Hardware

EP23 EDGE PULL

Write A Review
Regular price $2.25
Sale price $2.25 Regular price $0.00
Unit price
-US3-Bright brass
-US5-Antique Brass
Ask a question

Ask a Question

* Required fields

Size guide Share

EP23 Flush-Mounted Edge Pull

The Cal-Royal EP23 is a flush-mounted edge pull for compatible sliding or pocket-door applications. It provides an edge-accessible grasping point where a projecting face handle would interfere with pocket clearance. It is a pull, not a latch or privacy lock.

Practical Uses

  • Pocket-door retrieval: Provide an accessible pulling point at the exposed door edge.
  • Sliding-door refurbishment: Replace a matching edge pull after checking the recess and fixing pattern.
  • Low-profile hardware layouts: Coordinate the pull with the door's actual pocket, guides, and edge clearance.

Everyday example: A pocket door slides back into its wall pocket. With the EP23's grasping point still accessible at the edge, the user can pull the door out before using any separate face pull or privacy hardware. The installer checks this access at full travel before completing the recess.

Installation Guidance

Verify edge access: Check the door's fully open position and pocket stops. The pull must remain reachable rather than disappearing behind trim.

Compare the actual recess: Use the manufacturer drawing and supplied part to check body dimensions, depth, screw positions, and available door material before cutting.

Check surrounding hardware: Keep preparation clear of other lock, latch, or pull recesses. Confirm that the mounting area is sound.

Seat the pull correctly: Follow the model preparation so the mounting surface does not snag the jamb or guides. Verify fastener engagement without overtightening.

Test through full travel: Check access, grasping clearance, and smooth sliding with all trim installed. Correct track or guide binding separately.

Problems It Helps Address

  • A pocketed door is difficult to grasp: Provides a dedicated edge pull where accessible.
  • A face handle would interfere: Offers an edge-mounted arrangement for compatible preparation.
  • A replacement needs matching: Exact model drawing supports recess and mounting checks.

Product Details

  • Part number: EP23
  • Type: Flush-mounted edge pull
  • Listed face dimensions: 5/8 × 3-1/2 inches
  • Listed projection reference: 1-1/4 inches; check actual deployed clearance
  • Listed standard reference: ANSI/BHMA A156.14 D2801
  • Selectable finishes: US3-Bright Brass; US5-Antique Brass

Selection tip: Confirm actual preparation and pocket clearance before ordering. The EP23 does not release a separate latch, lock the door, or correct worn rollers or a binding track.

Manufacturer Document