PULL00 Engraved Stainless Steel Pull Plates (Ellipse Pull Bar)
PULL00 Engraved Stainless Steel Pull Plates with Ellipse Pull Bar
The Cal-Royal PULL00 Engraved Stainless Steel Pull Plates combine a stainless-steel plate, an ellipse pull bar, and a black 3/4-inch “PULL” engraving. The engraved instruction helps identify the pull side while the bar provides a handhold. Choose the listed 3-1/2 × 15-inch or 4 × 16-inch plate to suit the available mounting area.
Practical Uses
- Pull-side door hardware: Give users a grip and a visible opening-direction cue.
- Interior door refurbishment: Coordinate the pull and backing plate on a suitably prepared door.
- Maintenance replacement: Compare plate coverage, pull centers, and fastening layout before replacing an existing assembly.
Everyday example: At an interior office doorway, the black “PULL” engraving tells an approaching visitor which way the door opens. The ellipse bar supplies the handhold, while the plate provides a contact surface behind it. The complete latch and closer arrangement still determines how the door operates.
Installation and Fit Checks
Select the plate size: Measure the clear mounting area and compare the 3-1/2 × 15-inch and 4 × 16-inch options with nearby glazing, molding, locks, and trim.
Check the pull mounting: The selectable pull center-to-center reference is 5-1/2 inches. Verify the actual assembly and matching template before preparing holes; plate perimeter holes and pull mounting holes serve different purposes.
Confirm the door construction: Ensure the door can support the plate and handle attachments. Verify fastener engagement, door thickness, and suitable backing before installation.
Allow usable grip clearance: Position the pull where it can be reached and used without interference from the frame or surrounding hardware. Confirm the full door swing and adjacent-wall clearance.
Fasten without distortion: Follow the matching assembly instructions, keep the plate flat, and avoid overtightening. Inspect the pull and plate for movement after installation.
Check the complete opening: A pull plate does not release a separate latch or correct excessive opening resistance. Verify latch operation, closer adjustment, and the intended user's ability to operate the assembled door.
Problems It Helps Address
- Opening direction is unclear: Black “PULL” engraving provides a visible cue.
- A door needs a pull and backing plate: Combines both functions in one coordinated assembly.
- Replacement coverage must match: Two plate-size options help guide selection after measuring.
Product Details
- Series: PULL00
- Type: Engraved stainless-steel pull plate with ellipse pull bar
- Engraving: 3/4-inch “PULL,” black
- Selectable plate sizes: 3-1/2 × 15 inches and 4 × 16 inches
- Selectable pull mounting reference: 5-1/2-inch center to center
- Existing BHMA reference: J401
Selection tip: Confirm the plate size, actual hole pattern, supplied fasteners, and door thickness before drilling. Evaluate the complete installed opening for any accessibility requirements rather than relying on the pull plate alone.