ADAHB-4 HEAVY DUTY CAST METAL HANDRAIL BRACKET
ADAHB-4 Heavy Duty Cast Metal Handrail Bracket
Usually Ships: 1-3 Business Days
The Cal-Royal ADAHB-4 is a diecast handrail bracket for supporting a compatible wall-mounted handrail. Its contemporary design and listed 4-inch projection suit projects where the bracket geometry, rail profile, and wall construction have been checked together. Use it for new handrail installations or replacement work in stairways and ramps when the complete assembly is appropriate for the application.
Practical Uses
- Wall-mounted stair handrails: Connect a compatible rail to properly prepared wall structure.
- Ramp handrails: Provide a bracket option where its mounting arrangement and clearances meet the project's requirements.
- Replacement and renovation: Coordinate with existing architectural finishes after checking the old bracket's dimensions and hole pattern.
Everyday example: During a stairway renovation, the installer checks the rail profile and locates structural backing before positioning ADAHB-4 brackets. The finished rail provides a continuous place to grasp, with bracket spacing and anchorage designed for the actual installation rather than chosen by appearance alone.
Installation and Fit Checks
Confirm structural anchorage: Locate studs, blocking, or another suitable supporting structure. Check for concealed services before drilling. Do not assume decorative wall finishes or unsupported drywall can carry handrail loads.
Plan the rail layout: Determine bracket spacing, rail height, clearance, returns, and the required support arrangement for the complete handrail. The 4-inch bracket projection is not, by itself, the finished clear distance between the rail and wall.
Compare the mounting drawing: Check actual overall height, wall plate, rail attachment, hole locations, and rail contact surface against the actual bracket before ordering or preparing holes. Confirm that the bracket and rail can be secured without interfering with the intended gripping surface.
Check the fasteners: The manufacturer drawing identifies three #8 x 1-1/2-inch wood screws and two #6 x 15/16-inch wood screws. Verify supplied hardware and suitability for both wall structure and rail material. A different substrate may require a specifically designed anchorage arrangement; included screws are not a universal mounting solution.
Inspect before use: Secure the complete assembly according to the applicable installation guidance and verify that neither the rail nor brackets move. This bracket is not a substitute for a complete guardrail system or a verified structural design.
Product Details
- Part number: ADAHB-4
- Material: Diecast metal
- Listed width: 1-5/16 inches
- Listed projection: 4 inches
- Packaging: Individually poly-bagged with screws
Problems It Helps Address
- A missing or damaged handrail support: Provides a replacement option when the geometry and anchorage match.
- An incomplete rail installation: Supplies a wall-to-rail support component for a properly designed assembly.
- Mismatched visible hardware: Offers several finishes to coordinate with nearby fittings.
Available Finishes
US10B-Antique Bronze Oiled; US15-Satin Nickel; US15A-Satin Nickel Blackened; US26-Bright Chrome; US26D-Satin Chrome; US3-Bright Brass; US5-Antique Brass.
Standards and Application
The listing references ANSI/BHMA A156.16 L13061 and ADA regulations. These references do not establish that every installation using ADAHB-4 meets accessibility or structural requirements. Confirm current product documentation and the complete rail assembly's dimensions, loading, spacing, and anchorage against the project's requirements. No bracket load rating is established here.