SLAUTOFLM3 METAL DOOR AUTOMATIC FLUSH BOLT
SLAUTOFLM3 Self-Latching Automatic Flush Bolt for Metal Doors
Usually Ships in 1–3 Business Days
The Cal-Royal SLAUTOFLM3 Self-Latching Automatic Flush Bolt is intended for the inactive leaf of a compatible pair of metal doors. The listed arrangement combines a self-latching top bolt and automatic bottom bolt. Choose US10B-Antique Bronze Oiled or US26D-Satin Chrome.
Practical Uses
- Paired metal doors: Provide coordinated bolting for the inactive leaf when the complete opening is designed for this arrangement.
- Replacement work: Compare the existing preparation, strikes, and active-leaf contact with the SLAUTOFLM3 drawings.
- Specified projects: Coordinate selection with the complete door, frame, closer, and any required sequencing hardware.
Everyday example: On a pair of service-room metal doors, an installer checks both leaves' alignment and compares the existing top and bottom preparation with the SLAUTOFLM3 drawings. After fitting and adjusting the hardware, both leaves are cycled in the intended sequence to verify latching, release, strike engagement, and normal closing without forcing either door.
Installation Guidance
Use the self-latching model references: Confirm the exact SLAUTOFLM3 function and operating sequence before fitting. Do not substitute instructions for a conventional automatic model or an auxiliary-fire-latch arrangement.
Verify complete preparation: Compare the actual components, reinforcement, faceplates, strikes, and mounting positions with the three-page model drawings. A general ANSI-preparation reference does not establish drop-in compatibility.
Align the opening first: Correct door sag, hinge or pivot issues, and frame alignment before adjusting bolts. Receivers must allow proper engagement and retraction without dragging.
Check active-leaf contact and closing sequence: Test the mechanism's intended interaction with the other leaf and coordinate closer or sequencing hardware as required by the opening design.
Adjust within the model's limits: The listing specifies 3/4-inch vertical adjustment. Verify actual bolt projection and engagement using the manufacturer references; do not use adjustment to conceal an unsuitable preparation.
Test the complete cycle: Check both leaves individually and together. Verify self-latching behavior, bottom-bolt action, release, and clearance through repeated cycles before handover.
Problems It Helps Address
- An inactive metal leaf requires coordinated bolting: Provides a self-latching top-bolt and automatic bottom-bolt arrangement.
- Existing hardware needs accurate matching: Model-specific drawings support preparation checks.
- Minor vertical fit needs adjustment: Offers the listed adjustment provision within the actual hardware's limits.
Product Details
- Part number: SLAUTOFLM3
- Manufacturer identity: Self-latching automatic flush bolt for metal doors
- Listed arrangement: Self-latching top bolt and automatic bottom bolt
- Listed construction: Steel body with stainless steel components
- Handing: Reversible, non-handed
- Listed vertical adjustment: 3/4 inch
- Listed features: Override provision and thermal-lock mechanism; not substitutes for correct alignment or complete-opening verification
- Listed packaging: Two bolts per box with composite installation template; confirm the ordered unit and supplied components
- Selectable finishes: US10B-Antique Bronze Oiled; US26D-Satin Chrome
Selection tip: Confirm exact preparation, function, components, and opening requirements before ordering. Existing manufacturer references to UL10C, UBC 7-2-1997, labeled metal doors up to 8 feet, and 5-pound mechanism actuation must be checked against the current listing and complete assembly. They do not independently establish the fire rating, accessibility compliance, or release performance of the installed opening.