HPUL Modern Hospital Double Pull Arm - Cal Royal Hardware
HPUL Modern Hospital Double Pull Arm - Cal Royal Hardware

HPUL Modern Hospital Double Pull Arm

Write A Review
Regular price $72.75
Sale price $72.75 Regular price $0.00
Unit price
-US1 - Matte Black
-US15 - Satin Nickel
Ask a question

Ask a Question

* Required fields

Size guide Share

HPUL Modern Hospital Double Pull Arm

The Cal-Royal HPUL Modern Hospital Double Pull Arm provides an arm-operated pulling surface for a suitable door. The manufacturer identifies this modern hospital double-pull design as HPUL-850 in its cutsheet. Its shaped pull offers an alternative contact point to a conventional hand-grasp handle, while the door's latch, closer, and mounting arrangement remain separate considerations.

Practical Uses

  • Arm-assisted opening: Consider this pull for an opening where users prefer to engage a pull with an arm rather than grasp a conventional handle.
  • Healthcare and service-area projects: Evaluate the pull alongside the facility's door operation, cleaning, and hardware requirements.
  • Replacement or coordinated hardware: Check mounting centers, door thickness, and surrounding clearances before selecting the finish.

Everyday example: At a suitable unlatched service-room door, a staff member uses an arm to draw the door toward them. Before installation, the installer checks that the closer's resistance is manageable and that no separate latch must first be released.

Installation Guidance

Check the door operation: This pull does not unlock the door or retract a separate latch. Confirm how users will release any locking or latching hardware before relying on arm-assisted opening.

Confirm mounting preparation: The existing product specification lists Type 1 through-bolt mounting with finish washers for a 1-3/4-inch-thick door. Verify the supplied fasteners, actual door thickness, and required reinforcement before drilling.

Measure the layout: Check the listed 5-1/4-inch center-to-center spacing against the actual pull. Use the manufacturer's reference to assess the complete profile rather than assuming existing holes or surrounding clearances will match.

Choose a usable location: Check arm clearance, nearby trim and hardware, and the full door swing. Position the pull so it can be engaged and released without trapping an arm or contacting adjacent surfaces.

Test the opening: After mounting, verify secure attachment, unobstructed closing, and suitable operation with the installed closer and latch. Do not treat the pull alone as proof that an opening meets accessibility requirements.

Problems It Helps Address

  • A conventional grip is not preferred: Provides an alternate arm-contact pulling surface.
  • Mounting uncertainty: Listed centers and door-thickness references help plan installation.
  • Coordinating visible hardware: Two listed finish options support matching the surrounding hardware.

Product Details

  • Product designation: HPUL; manufacturer cutsheet identifies HPUL-850
  • Design: Modern hospital double pull arm
  • Listed material: Aluminum
  • Listed size: 8-1/2 × 1 inches
  • Listed mounting centers: 5-1/4 inches
  • Listed material section: 3/8 × 1 inch
  • Listed mounting: Type 1 through-bolt and finish washer for 1-3/4-inch-thick doors
  • Packaging: Individually packed with guide sticker
  • Existing specification references: Microban anti-microbial coating and ANSI 156.6 for J401 pulls

Care note: Follow the manufacturer's care instructions for the selected finish and coating. An anti-microbial coating does not replace routine cleaning or establish protection against illness.

Available Finishes

  • US1 - Matte Black
  • US15 - Satin Nickel

Selection tip: Confirm the exact supplied model, mounting centers, door thickness, and clearance before ordering. Select any separate latch or closer to suit the complete opening.

Manufacturer Document

HPUL-850 Modern Hospital Double Pull Arm Cutsheet