SDL17 PASSAGE SLIDING DOOR LOCK - Cal Royal Hardware
SDL17 PASSAGE SLIDING DOOR LOCK - Cal Royal Hardware

SDL17 PASSAGE SLIDING DOOR LOCK

Write A Review
Regular price $10.25
Sale price $10.25 Regular price $0.00
Unit price
-US10B-Antique bronze oiled
-US15-Satin nickel
-US15A-Satin nickel Blackened
-US19-Matte Black
-US26-Bright Chrome
-US26D-Satin Chrome
-US3-Bright brass
-US5-Antique Brass
Ask a question

Ask a Question

* Required fields

Size guide Share

SDL17 Passage Sliding Door Lock and Pull

The Cal-Royal SDL17 Passage Sliding Door Lock is pocket-door hardware for interior passage openings where privacy locking is not required. The SDL17 provides recessed gripping surfaces and an edge pull for moving a compatible door into and out of its wall pocket. Its listed 2-1/4" x 1-3/4" door-edge preparation and reversible, non-handed arrangement support suitable replacement and new-installation projects.

Practical Uses

  • Closets and connecting rooms: Provides a pull for pocket doors that do not need keyed access or privacy locking.
  • Space-saving interior openings: Recessed grips avoid using a projecting lever on a door that travels into a pocket.
  • Retrieving the door: The edge pull offers a grasping point when the door is recessed and the edge remains accessible.
  • Replacement projects: Consider it when the existing notch, door thickness, trim coverage, and pocket clearances match the supplied hardware.

For example, a pocket door between a hallway and a closet can slide out of sight when open. The SDL17's edge pull helps bring it back out, while the recessed face grips let you move it across the opening without a protruding handle. Passage operation keeps the opening free from a privacy-locking control.

Installation and Replacement

The manufacturer catalog specifies a 2-1/4" long x 1-3/4" wide standard door preparation for 1-3/8" and 1-3/4" thick doors. Check the actual supplied assembly for the intended thickness rather than assuming every intermediate thickness or unusual door construction will fit.

Mark the door-edge notch using the applicable instructions and actual hardware before cutting. Check that the door stile contains enough sound material to support the fitting and its screws. Confirm that the face trim, fasteners, and edge pull clear the pocket jamb, guides, and surrounding trim throughout travel.

The shared SDL16/SDL17 instruction sheet directs the installer to slip the assembly into the notch, tighten the machine screws on both sides, and install the wood screws. Its later steps also show latch-arm and strike preparation; do not assume those shared-sheet locking steps are required for this passage selection. Follow the preparation applicable to the supplied SDL17 components, and confirm any uncertainty before drilling the jamb.

The separate dimensional template identifies two #5 x 7/16" wood screws. Verify the supplied fasteners and mounting material. Tighten securely without distorting the trim, then test the face grips, edge pull, and full door travel. Correct binding or worn track components separately rather than forcing the door by the pull.

Problems It Helps Address

  • Difficulty grasping a recessed door: An edge pull provides access when the door is parked in the pocket.
  • Projecting-handle interference: Recessed gripping surfaces suit compatible pocket-door travel.
  • Unnecessary privacy controls: Passage hardware serves openings where users do not need to lock the door.
  • Replacement-fit uncertainty: Model-specific preparation information helps compare an existing notch before buying or cutting.

The SDL17 is not a keyed security lock, privacy lock, door closer, or track repair. Its pocket-door application does not establish universal fit on surface-mounted barn doors or every sliding-door system. Where privacy is required, select hardware with a verified privacy function rather than relying on the word “lock” in this product's name.

Product Details

  • Part number: SDL17
  • Type: Passage sliding door hardware with recessed grips and edge pull
  • Application: Compatible interior pocket-type passage doors
  • Function: Passage, without privacy locking
  • Listed standard door preparation: 2-1/4" long x 1-3/4" wide
  • Manufacturer-listed door thicknesses: 1-3/8" and 1-3/4"
  • Handing: Reversible, non-handed, as identified in the existing listing
  • Trim detail: Decorative coined edges, as identified in the existing listing
  • Template fastener reference: Two #5 x 7/16" wood screws; confirm the supplied assembly and suitable attachment

Preparation and Comparison Notes

Use the listed door preparation dimensions for evaluating the notch, not as the finished trim's overall dimensions. The dimensional drawing includes a 2-1/2" reference and other component measurements; match each measurement to the drawing and the supplied part before relying on it for trim coverage or replacement fit.

The manufacturer compares the SDL17 to Quality No. 100. This is a comparison reference, not a guarantee of identical dimensions, screw locations, or direct interchangeability.

Finish Options

US10B-Antique Bronze Oiled, US15-Satin Nickel, US15A-Satin Nickel Blackened, US19-Matte Black, US26-Bright Chrome, US26D-Satin Chrome, US3-Bright Brass, and US5-Antique Brass. Finish names describe appearance and do not establish the base material of every component.

Installation Instructions and Template

Catalog Reference

SDL17 Passage Sliding Door Hardware Catalog Entry