PSPL Push Plates - Cal Royal Hardware
PSPL Push Plates - Cal Royal Hardware

PSPL Push Plates

Write A Review
Regular price $23.75
Sale price $23.75 Regular price $0.00
Unit price
-US1-Matte Black
-US10-Satin Bronze
-US10B-Antique bronze oiled
-US26-Bright Chrome
-US3-Bright brass
-US32D-Satin Stainless Steel
-US4-Satin brass
-US5-Antique Brass
Ask a question

Ask a Question

* Required fields

Size guide Share

PSPL Push Plates: PSPL3515 and PSPL4016

Usually Ships: 1-3 Days

The Cal-Royal PSPL Push Plates provide a defined contact surface on the push side of a door, helping reduce direct hand contact and everyday marking on the underlying finish. Choose PSPL3515, nominally 3-1/2 × 15 inches, or PSPL4016, nominally 4 × 16 inches. Both listed sizes are 0.050 inch thick and come individually packed with protective film and screws.

Practical Uses

  • Push-side door protection: Place a plate where users normally press to open a suitable door.
  • Interior refurbishment: Add a coordinated contact surface after checking the door finish, existing holes, and available stile area.
  • Maintenance replacements: Compare plate size and hole layout before replacing worn or marked push hardware.

Everyday example: On an interior door opened many times each day, a correctly positioned PSPL plate gives users a clear place to push. Routine cleaning focuses on the plate rather than repeatedly rubbing the painted door surface underneath.

Installation and Selection Checks

Choose the size: Measure the clear mounting area and compare both nominal plate sizes. Check surrounding glazing, moldings, locks, and other trim before selecting a plate.

Plan placement: Position the plate on the push side in a useful contact area. Confirm it does not cover operating hardware or interfere with door movement.

Check replacement holes: Do not assume two similarly sized plates share the same hole pattern. Compare the selected model's drawing and the actual plate before drilling.

Use suitable fastening: Confirm the door construction and backing can accept the mounting screws. Use an installation method appropriate to the door material and avoid overtightening or distorting the plate.

Protect the finish: Keep the protective film in place during handling as appropriate, then remove it for service. Check the finished plate for sharp damage or loose edges.

Check the door's operation: A push plate does not retract a separate latch or correct excessive opening resistance. Make sure the complete door hardware arrangement operates as intended.

Problems It Helps Address

  • Repeated hand contact marks a door: Provides a replaceable contact surface at the push area.
  • Users need a clear push location: Visually identifies a contact area without adding a projecting pull.
  • Existing trim needs replacement: Two nominal sizes support selection after measuring the available space.

Product Details

  • Series: PSPL Push Plates
  • PSPL3515: Nominal 3-1/2 × 15 inches
  • PSPL4016: Nominal 4 × 16 inches
  • Listed thickness: 0.050 inch
  • Manufacturer reference: Conforms to ANSI/BHMA A156.6
  • Packaging: Individually packed with protective film and screws
  • Selectable finishes: US1-Matte Black, US10-Satin Bronze, US10B-Antique Bronze Oiled, US26-Bright Chrome, US3-Bright Brass, US32D-Satin Stainless Steel, US4-Satin Brass, and US5-Antique Brass

Selection tip: Check the actual plate and model-specific drawing before preparing the door. Select the size and finish combination needed for the opening; do not infer a base material from a finish name alone.

Manufacturer Documents