LSDC-315 Security Door Stops
LSDC-315 Security Door Stop
Usually Ships in 1-3 Business Days
The Cal-Royal LSDC-315 Security Door Stop is a black bumper made from flame-resistant, resilient material molded around a heavy-duty stud. The manufacturer describes it for high-traffic, abusive, and security applications. Its installation instructions show grouted floor or wall mounting, with the bumper seated flush against the mounting surface.
Practical Uses
- High-traffic openings: Provide a substantial contact bumper where the door and mounting structure suit the installation.
- Floor-mounted stopping: Limit opening travel at an appropriate door contact point.
- Wall-mounted stopping: Consider the manufacturer's wall application when structural conditions and contact height permit.
Everyday example: At a busy service doorway, the installer opens the door to the intended limit and checks that the bumper will contact a sound area before the handle reaches the wall. After checking the substrate and concealed services, the installer follows the grout-in preparation and allows the installation to set before testing contact.
Installation Guidance
Choose the contact location: Open the door to the desired stopping position and mark the floor or wall location. Avoid glazing, fragile trim, unsupported panels, and positions that create an obstruction.
Check the structure before drilling: Verify suitable substrate depth and strength, and locate concealed utilities, reinforcement, or other hazards. Have the responsible installer confirm the preparation.
Follow the grout-in instructions: The manufacturer specifies a 1-inch-diameter hole, 2-3/4 inches deep, removal of loose material, and grouting the stop into the floor or wall. Follow the supplied instructions and suitable grout requirements for the actual substrate.
Seat the bumper correctly: The manufacturer's application diagrams show the stop flush with the floor or wall. Confirm alignment and allow the grout to set as required before loading the stop.
Test and maintain: Open the door slowly after installation is ready for use. Check contact, mounting stability, and clearance around the stop. Inspect the bumper and grout attachment periodically.
Problems It Helps Address
- A door approaching an obstruction: Provides a physical contact stop when properly placed.
- A demanding contact location: Uses a resilient bumper molded around a heavy-duty stud.
- A project needing a grout-in stop: Manufacturer floor and wall instructions support installation planning.
Product Details
- Part number: LSDC-315
- Finish/color: Black
- Bumper: Flame-resistant, resilient material molded around a stud
- Manufacturer-listed bumper dimensions: 2-inch diameter × 3-1/2-inch height
- Manufacturer-listed stud dimensions: 5/8 × 2-1/2 inches
- Mounting reference: Grout-in floor or wall application
Selection tip: Confirm the actual door contact point, substrate, and grout-in preparation before ordering. This is a physical stop, not a hydraulic speed control, hold-open device, or security lock. The flame-resistant material description does not establish a fire rating for the complete opening.