CCD30 Single Spring Crash Chain Door Guard
CCD30 Single Spring Crash Chain Door Guard
The Cal-Royal CCD30 is a single-spring crash chain intended to help limit a compatible door's opening travel and cushion the point at which the chain takes up. The existing listing identifies heavy-gauge zinc brackets, a steel chain, and a plated zinc finish. It is individually poly-bagged with mounting screws.
Practical Uses
- Doors exposed to sudden opening: Add a supplementary travel-limiting connection where the door, frame, and anchorage can support it.
- Wind-exposed openings: Help reduce overtravel risk when the installation is suitable; protection against every gust or impact is not guaranteed.
- Replacement projects: Replace a matching crash chain after checking bracket geometry, chain reach, mounting holes, and spring clearance.
Everyday example: A service door can swing farther than intended when caught by a gust. A correctly positioned CCD30 takes up before the door reaches an unsuitable travel limit, with the spring cushioning engagement. The installer still checks hinges, closer limits, anchorage, and clearances rather than relying on the chain alone.
Installation and Placement
Establish permitted travel: Move the door through its intended swing and check hinge, closer, frame, and adjacent-glass clearances. Position the chain to engage before damaging overtravel without forcing other hardware beyond its permitted range.
Confirm reach and slack: Check the actual assembly between the planned mounting points with the door closed and open. Avoid excessive slack, binding, tangling, or interference with normal passage and nearby hardware. Listed chain length does not establish a universal mounting distance or opening angle.
Mount to suitable structure: Check that both the door and frame provide sound material or appropriate reinforcement. The manufacturer drawing identifies four #7 x 7/8" wood screws. Verify supplied screws and suitability for the actual substrate; wood screws are not a universal fastening method for hollow metal or masonry.
Check operation gently: Test the full swing after fastening, confirming that the spring and chain engage without pulling brackets loose or contacting adjacent surfaces. Inspect mounting points, chain links, and spring condition regularly and after an unusual impact.
Problems It Helps Address
- Uncontrolled overtravel: Provides a supplementary limit when correctly positioned.
- Abrupt chain engagement: Uses a spring to cushion take-up rather than a completely rigid link.
- A damaged matching chain assembly: Provides a replacement option after fit and anchorage checks.
Product Details and Dimension Check
- Part number: CCD30
- Type: Single-spring crash chain door guard
- Listed construction: Heavy-gauge zinc brackets and steel chain
- Listed finish: Plated zinc
- Existing listed chain length: Approximately 21-3/4"; confirm actual assembly reach before replacement
- Existing listed spring diameter: 13/16"
- Packaging: Individually poly-bagged with mounting screws