PULL-2815 SLIDING DOOR HANDLE PULL
PULL-2815 Sliding Door Handle Pull
Usually Ships: 1-3 Business Days
The Cal-Royal PULL-2815 Sliding Door Handle Pull provides a handhold for a compatible wood sliding door. Its back-to-back mounting arrangement places a pull on each face, making the door accessible from either side when the layout provides adequate clearance. Choose Black or US32D-Satin Stainless Steel from the available finish options.
Practical Uses
- Interior wood sliding doors: Add a grip on both sides of a properly prepared door.
- Closet and pantry layouts: Provide a pull where the surrounding trim and wall leave room for projecting hardware.
- Replacement installations: Compare the existing holes and door preparation with the PULL-2815 template before selection.
Everyday example: When refitting a pantry sliding door, an installer checks that both handles will clear the adjacent wall and trim. After confirming the door thickness and preparation, the installer mounts the PULL-2815 pair and moves the door through its full travel before returning it to use.
Installation and Fit Checks
Confirm door construction: The existing listing identifies wood-door use and a 1-3/8 to 1-3/4-inch thickness reference. Verify the mounting hardware supplied suits the actual door thickness and provides proper engagement.
Use the model template: Compare mounting centers, hole sizes, and component orientation with the actual handle before drilling. Do not substitute dimensions from a similar-looking pull.
Check clearance on both faces: Allow hand space and verify the handles do not hit the jamb, wall, trim, or adjacent door panel. A projecting handle may limit how far a door can enter a pocket.
Protect the door: Use a drilling and fastening method suited to the wood construction and available backing. Keep the pulls aligned, tighten as instructed, and avoid crushing or distorting the door.
Test travel and attachment: Confirm that the handles remain firm and the door moves freely. Correct roller, track, guide, and alignment problems separately rather than forcing the door with the pull.
Problems It Helps Address
- A sliding door needs a usable grip: Gives the user a defined handhold instead of gripping the door edge.
- Both faces need handles: A back-to-back arrangement supports operation from either side.
- A replacement must match existing preparation: Model-specific documents help assess fit before drilling.
Product Details
- Part number: PULL-2815
- Type: Sliding door handle pull
- Listed application: Wood sliding doors
- Listed mounting: Back-to-back
- Existing door-thickness reference: 1-3/8 to 1-3/4 inches; confirm against the supplied mounting hardware
- Selectable finishes: Black and US32D-Satin Stainless Steel
Selection tip: Verify the actual handle dimensions, mounting centers, door thickness, and full sliding clearance before ordering. Pull handles do not include a locking function or replace the door's track and roller system.