SBDG00 SOLID BRASS DOOR GUARD W/ANGLE - Cal Royal Hardware
SBDG00 SOLID BRASS DOOR GUARD W/ANGLE - Cal Royal Hardware

SBDG00 SOLID BRASS DOOR GUARD W/ANGLE

Write A Review
Regular price $24.40
Sale price $24.40 Regular price $0.00
Unit price
-US1-Matte black
-US10B-Antique bronze oiled
-US15-Satin nickel
-US26D-Satin Chrome
-US3-Bright brass
-US4-Satin brass
Ask a question

Ask a Question

* Required fields

Size guide Share

SBDG00 Solid Brass Door Guard with Angle Protector

The Cal-Royal SBDG00 Solid Brass Door Guard with Angle Protector provides supplemental limited-opening control on a compatible door and frame. Its swing-bar arrangement and ball-bearing stop guide allow a partial opening when engaged. The supplied door angle protector helps reduce contact scarring when correctly positioned. This is an additional guard, not a replacement for the door's primary lock.

Practical Uses

  • Occupied-room use: Limit a compatible door's opening while allowing a brief conversation or visual check.
  • Interior refurbishments: Add a coordinating guard where the door/frame geometry and backing are suitable.
  • Replacement work: Compare the SBDG00 mounting positions, bar travel, and protector location with the existing installation.

Everyday example: On a compatible inward-opening room door, an installer checks the frame offset and marks both guard components with the door closed. The angle protector is positioned where contact could occur. The installer then opens the door slowly to verify engagement, limited travel, and easy release before normal use.

Installation Guidance

Confirm door and frame fit: Check the reveal, trim profile, mounting surfaces, and bar path before drilling. Do not assume the guard suits every offset or opening direction.

Secure into sound material: Both components need suitable structural attachment. Decorative trim or a thin door skin alone should not be assumed adequate.

Position the angle protector: Follow the manufacturer reference and actual component arrangement. Check surface suitability for adhesive contact and the intended screw attachment rather than relying on tape as structural anchorage for the guard.

Align before tightening: Trial the assembly with the door closed, then open slowly to confirm the bar engages without scraping or forcing the parts.

Check release and storage: Ensure the bar can be disengaged and moved clear for normal door travel. Verify that it does not interfere with nearby hardware.

Inspect regularly: Check fixing security, guide movement, alignment, and protector contact. Correct door sag or damaged backing independently.

Problems It Helps Address

  • A door needs a supplementary limited-opening position: Provides a swing-bar guard on a compatible opening.
  • Contact can scar the door or frame: Includes an angle protector to help reduce contact damage when properly installed.
  • Hardware finishes need coordinating: Offers six selectable finishes.

Product Details

  • Part number: SBDG00
  • Construction: Solid brass
  • Type: Swing-bar door guard with angle protector
  • Listed guide: Ball-bearing stop guide
  • Listed arm length: 4-3/4 inches; verify actual mounting geometry before preparation
  • Listed standard reference: ANSI/BHMA A156.16; confirm suitability for the intended project
  • Selectable finishes: US1-Matte Black, US10B-Antique Bronze Oiled, US15-Satin Nickel, US26D-Satin Chrome, US3-Bright Brass, US4-Satin Brass

Selection tip: Confirm dimensions, mounting arrangement, supplied components, and release requirements before ordering. Limited opening is not a forced-entry guarantee. Keep the primary lock in service and confirm supplemental hardware is appropriate for the opening.

Manufacturer Document

SBDG00 Manufacturer Cutsheet, Door Guard with Angle Protector