FBG6 SOLID BRASS FLUSHBOLT ROUND
FBG6 Solid Brass Round-End Flush Bolt
Usually Ships: 1-3 Business Days
The Cal-Royal FBG6 Solid Brass Flushbolt Round is a round-end, single-route mortise flush bolt for the inactive leaf of a suitable double-door arrangement. Its recessed installation provides manual bolt operation without an exposed surface-bolt body. Confirm the full preparation, bolt travel, and receiving strike position before selecting it for a new or existing door.
Practical Uses
- Inactive double-door leaves: Provide manual retention where a flush bolt is appropriate to the opening.
- Round-end preparations: Consider this model when the actual mortise and mechanism dimensions match.
- Hardware replacement: Replace a compatible worn bolt after checking the complete body, faceplate, and strike arrangement.
Everyday example: On a suitable pair of interior doors, the inactive leaf remains closed with its flush bolt engaged while the active leaf is used. Before opening both leaves, the user fully retracts the FBG6 so the bolt clears its strike.
Installation Guidance
Confirm suitability: Verify that manual bolting is appropriate to the opening and any applicable fire, accessibility, or emergency-egress requirements. Do not assume this model is automatic or fire-rated.
Match the mortise: Compare the actual part and manufacturer drawing with the door's edge construction, thickness, available depth, and existing preparation. A round-end faceplate alone does not establish an interchangeable fit.
Align the receiving point: Ensure the door is correctly hung and closes into position before locating the strike. The bolt should engage without force; correct door sag or misalignment rather than using the bolt to pull the leaf into place.
Fasten and test: Use fastening suited to the door and receiving material. The bolt is packed with a strike and two sets of screws; verify which fastening suits the actual installation. Check full extension and retraction repeatedly, and confirm clearance before moving the leaf.
Problems It Helps Address
- An inactive leaf needing manual retention: Provides a bolt-and-strike connection when appropriate to the door arrangement.
- A preference for recessed hardware: Uses a mortised rather than exposed surface installation.
- A worn compatible flush bolt: Offers a replacement option after dimensional checks.
Product Details
- Part number: FBG6
- Construction: Solid brass
- Type: Single-route flush bolt with round-end faceplate
- Operation: Manual
- Faceplate width: 3/4 inch
- Bolt-head diameter: 5/16 inch
- Listed throw: 3/4 inch
- Packaging: Individually poly-bagged with strike and two sets of screws
Available Finishes
- US10B-Antique Bronze Oiled
- US15-Satin Nickel
- US15A-Satin Nickel Blackened
- US26-Bright Chrome
- US26D-Satin Chrome
- US3-Bright Brass
- US5-Antique Brass
Selection tip: Compare the complete profile and mounting positions in the manufacturer drawing with the actual door before ordering or cutting.