ZDFB800 SOLID ONE PIECE HEAVY DUTY FLUSH BOLT
ZDFB800 Diecast-Base Single-Route Flush Bolt
Usually Ships in 1–3 Business Days
The Cal-Royal ZDFB800 is a manual, round-end single-route flush bolt identified by the manufacturer as a solid one-piece heavy-construction design with a diecast base. Its recessed arrangement suits compatible inactive-leaf preparation, while the listed deep-cup finger hole and double-action spring provide manual operation with the bolt held in either the projected or retracted position.
Practical Uses
- Suitable paired-door installations: Provide manual bolting for an inactive leaf where the opening permits this hardware function.
- Flush-bolt replacement: Compare the existing recess, round-end profile, fixing positions, and strike with the exact model drawing.
- Coordinated door hardware: Select from the six available architectural finishes to suit surrounding trim.
Everyday example: During an interior double-door refurbishment, the installer compares the old recess and strike with the ZDFB800 drawing before fitting. Once the leaves are aligned, the finger-operated bolt is extended into the receiver and fully retracted several times to check that it moves without dragging or forcing the door.
Installation Guidance
Confirm permitted use: Check the complete opening requirements before selecting manual inactive-leaf bolting. Do not assume this model is appropriate for every fire-door or exit application.
Compare preparation before routing: Verify actual body length, width, depth, rounded ends, and mounting positions against the components and current drawing.
Align the strike: Provide sufficient receiver clearance and engagement without using the bolt to pull a sagging or misaligned door into place.
Check backing and fasteners: Confirm secure attachment in the actual door and receiving surface. The drawing provides fastener references; verify suitability and supplied contents before machining.
Test manual travel: Confirm that the finger hole is usable, the bolt stays in the selected position, and full retraction clears the receiving surface before the door moves.
Maintain the receiver: Inspect attachment and clear debris from the bolt path or receiver as needed.
Problems It Helps Address
- A suitable inactive leaf needs manual bolting: Provides a recessed bolt arrangement.
- Replacement fit needs checking: Exact model documents support recess and strike comparison.
- Projected and retracted positions must be retained: The listed double-action spring holds the manually selected position.
Product Details
- Part number: ZDFB800
- Manufacturer identity: Diecast-base, round-end, single-route flush bolt with solid one-piece heavy construction
- Operation: Manual finger operation; not an automatic active-leaf-actuated bolt
- Listed width: 3/4 inch
- Listed bolt-head diameter: 5/16 inch
- Listed throw: 3/4 inch; verify actual engagement requirements
- Listed included components: Strike and screws
- Selectable finishes: US10B-Antique Bronze Oiled; US15-Satin Nickel; US26-Bright Chrome; US26D-Satin Chrome; US3-Bright Brass; US5-Antique Brass
Selection tip: Verify actual dimensions, preparation, and complete-opening requirements before ordering. The spring's position-holding action does not make this an automatic flush bolt, and heavy-duty wording does not establish a forced-entry or fire rating.