Cal Royal T-Astragal
Cal Royal T-Astragal
Cal Royal T-Astragal
Cal Royal T-Astragal

EAST-501 T-Astragal

Write A Review
Regular price $40.20
Sale price $40.20 Regular price $0.00
Unit price
Alum
Duro
Ask a question

Ask a Question

* Required fields

Size guide Share

EAST-501 T-Astragal with Flexible Vinyl Insert

Our EAST-501 T-astragal combines an aluminum channel with a flexible vinyl insert to help seal the meeting gap between a pair of doors. The profile measures 1/4 inch high x 1-3/8 inches wide. Select the required 80, 84, 96, or 108-inch length in Alum or Duro, checking the actual pair configuration and full door-edge length before ordering.

Practical Uses

  • Exterior double doors: Commonly used at paired entrance doors where the specified astragal helps close the meeting gap.
  • Wood or hollow-metal doors: Confirm suitable construction, attachment, and preparation for the actual opening.
  • Replacement work: Match the existing profile, length, insert contact, and operating arrangement.

Everyday example: A contractor is renewing the meeting-edge seal on a pair of exterior doors. They confirm which leaf is active, measure the required astragal length, and check the header and threshold relationships. After fitting EAST-501 and adjusting its position, they test both leaves in the required sequence and confirm that the doors close and latch without binding.

Sealing and Adjustment

Flexible vinyl contact: The insert helps seal the meeting gap against air drafts and sound passage. Performance depends on the complete opening, surrounding seals, and installed contact; this is not a quantified acoustic rating or a guarantee of a draft-free doorway.

Slotted mounting holes: The specification identifies slotted holes in the channel for adjustment. Use the permitted adjustment to establish the intended contact without obstructing door operation.

Profile versus length: Height and width describe the cross section, not the selected stock length. Confirm the opening and trimming requirements before cutting.

Installation Guidance

  • Review the pair: Identify the active leaf, handing, required operating sequence, and nearby hardware.
  • Measure and cut: The guide calls for the full door length, leaving the vinyl insert slightly longer at each end.
  • Check end contact: The guide recommends insert contact with the header at the top and the threshold or floor at the bottom.
  • Position on the active edge: Follow the matching guide and verify compatibility with the actual pair arrangement.
  • Prepare and fasten: Verify the supplied fasteners and suitability for the door construction, then follow the specified pilot-hole and attachment method.
  • Adjust and test: Check insert contact, both leaves' movement, closing, latching, and required operating sequence.

Problems It Helps Address

  • A meeting gap needs sealing: Provides an aluminum channel and flexible vinyl contact for the specified pair.
  • An existing astragal is worn or damaged: Offers defined profile and length references for replacement checks.
  • Seal contact needs coordination: Slotted mounting holes support adjustment within the permitted installation.

Finish and Ordering Checks

The available Alum and Duro selections correspond to the specification's mill-finish aluminum with vinyl insert and dark-bronze anodized aluminum with vinyl insert references. Check the listing's actual choices when ordering rather than assuming every catalog finish or length is offered here.

Confirm exact length, package contents, fastening requirements, and compatibility with locks, bolts, coordinators, exit hardware, and other meeting-edge components. For a rated or otherwise specified opening, verify the permitted astragal and preparation against the complete assembly requirements. This component alone does not establish fire, smoke, acoustic, or complete-opening compliance.

Care and Matching Documents

Inspect the vinyl insert, mounting security, and contact periodically. Keep contact areas free of debris and use cleaning methods compatible with the supplied materials and finish. Address loose components, damaged inserts, or interference with closing before continued use.

Usually Ships 1-3 Days

NOTE: 96", 108", 120" Astragals will incur additional over size charges from carrier.