UNDS14 UNIVERSAL DOOR STOP- HEAVY DUTY
UNDS14 Universal Heavy-Duty Floor Door Stop
Usually Ships in 1–3 Business Days
The Cal-Royal UNDS14 is a solid-brass heavy-duty dome stop for floor-mounted door-contact applications. The listing describes low- and high-profile arrangements, allowing the installation to be evaluated against the actual door undercut and required contact position rather than treating one height as suitable for every opening.
Practical Uses
- Interior door travel limitation: Position a physical stop to intercept a door before nearby trim or hardware reaches the wall.
- Replacement work: Compare the existing floor preparation and door-contact height with the UNDS14 drawing.
- Different undercut conditions: Evaluate the listed profile arrangements against the actual door clearance and bumper position.
Everyday example: During an office refresh, the installer swings the door slowly and marks a stop position that keeps the lever clear of the wall. After checking the undercut, suitable contact area, floor construction, and walking path, the UNDS14 is fitted and tested to confirm the door contacts the bumper rather than passing over it.
Installation Guidance
Check the installed profile: Measure the floor-to-door clearance and compare the actual components with the model drawing. Confirm bumper contact before drilling.
Choose a safe position: Check the complete door swing, nearby hardware, access route, and cleaning clearance. Avoid creating an obstruction in the walking path.
Verify the floor: Identify the substrate, secure fixing method, and any concealed services before making holes. Do not assume one anchor arrangement is suitable for every floor.
Use the current mounting reference: Check the actual supplied hardware against the manufacturer drawing and floor requirements before selecting hole size, depth, or fasteners.
Test contact carefully: Swing the door slowly through its travel and verify stable bumper contact without floor movement. Recheck attachment during maintenance.
Problems It Helps Address
- Hardware approaches an adjacent wall: Provides a physical stopping point when correctly positioned.
- A replacement stop needs fitting: Model-specific documents support profile and mounting checks.
- Undercut affects contact: Encourages selection of a suitable installed profile rather than relying on appearance alone.
Product Details
- Part number: UNDS14
- Manufacturer identity: Solid-brass heavy-duty dome stop
- Mounting: Floor mounted
- Listed nominal base diameter: 1-3/4 inches
- Listed base height: 1/4 inch
- Listed overall height reference: 1-5/8 inches; verify the chosen arrangement against the door
- Listed standard reference: ANSI/BHMA A156.16, L02141 when used as DSLP4; this is a conditional reference, not a rating for every arrangement
- Selectable finishes: US26D-Satin Chrome; US1-Matte Black; US10B-Antique Bronze Oiled; US15-Satin Nickel; US26-Bright Chrome; US3-Bright Brass; US4-Satin Brass; US5-Antique Brass
Selection tip: A dome stop limits travel through physical contact. It is not a door closer, speed controller, lock, or hold-open mechanism. Check actual profile, door contact, and mounting conditions before ordering.