VINYL RUBBER STOP
Usually Ships: 1-3 Business Days
RUBDH25 and RUBSBDH Vinyl Rubber Replacement Stops
Our vinyl rubber replacement stops renew the floor-contact tip on a matching kick-down door holder. Choose the DH25 selection for the RUBDH25 reference, or the SBDH/SBDH41300 selection for the RUBSBDH reference. Match the existing holder and its tip attachment before ordering; these are replacement tips, not complete door holders.
Select the Matching Replacement
- DH25 selection: Compare the RUBDH25 drawing with the existing DH25 holder and tip.
- SBDH/SBDH41300 selection: Compare the RUBSBDH drawing with the existing holder and tip. The listed replacement application includes SBDH41300 and SBDH5.
- Material: Vinyl rubber.
- Listed color: Grey.
- Contact design: Concentric grooves at the floor-contact surface.
Replace the Wear Part, Not Automatically the Whole Holder
The tip is the part that meets the floor when a kick-down holder is engaged. Our replacement stops provide a model-specific service option when that tip is worn or damaged and the holder itself remains serviceable. Inspect the holder's pivot, mounting, and attachment point as well as the rubber before deciding that a new tip is sufficient.
The grooved contact surface is intended to support grip, but actual holding depends on the floor surface, cleanliness, holder angle, door forces, and condition of the complete assembly. Do not assume that a replacement tip guarantees non-slip performance or prevents every type of floor marking.
Practical Applications
- Routine maintenance: Replace a worn contact tip on a verified matching holder.
- Repair work: Restore the intended contact component when the metal holder and its attachment remain sound.
- Maintenance stocking: Identify holder models before choosing spare tips rather than treating all kick-down tips as interchangeable.
Everyday example: A maintenance worker finds a worn tip on a DH25 holder. They identify the holder, compare its attachment and original tip with the RUBDH25 drawing, and inspect the pivot and door mounting. After fitting the matching replacement, they test it on the actual floor and check that the holder lifts fully clear when released.
Fit and Installation Guidance
- Identify the holder: Check the model and existing attachment instead of choosing solely by color or overall appearance.
- Compare the exact drawing: Review the relevant RUBDH25 or RUBSBDH reference and the supplied part before installation.
- Inspect the assembly: Address loose mounting, damaged retention, or a worn pivot before replacing the contact tip.
- Confirm retention: Verify the actual attachment method and supplied contents; do not assume a fastener or complete holder is included.
- Check contact: Confirm that the tip sits correctly against the intended floor surface without forcing the mechanism.
- Test both positions: Check holding under controlled conditions and verify full clearance when the holder is raised.
Problems It Helps Address
- A contact tip is worn or missing: Provides the identified model-specific replacement option.
- The holder is otherwise serviceable: Allows the contact component to be considered separately from the complete assembly.
- Replacement selection is uncertain: Separate model references help avoid assuming that different tips share the same geometry.
Care and Application Checks
Keep the tip and contact area clean, and inspect for hardening, cracking, damage, or poor retention. Test on the actual floor finish and replace worn parts promptly. A new tip will not correct an unsuitable holder location, damaged hardware, or an incompatible floor condition.
Confirm that a kick-down holder is appropriate for the opening. Do not use it to defeat required closing or latching, and do not infer a fire rating or complete-opening approval from the replacement tip. Verify purchase quantity and exact contents before ordering.