WSNP-04 WALL MOUNT DOOR STOP
Ships in 1-3 Business Days
WSNP-04 Stainless Steel Wall Door Stop, No Plate
The Cal-Royal WSNP-04 Wall Mount Door Stop provides a projecting, rubber-tipped contact point to help keep a compatible swinging door or its hardware from striking the wall. The WSNP-04 combines stainless steel construction with a no-plate design for suitable residential and light commercial openings.
Practical Uses
Consider the WSNP-04 where a projecting wall stop can contact the door before the lever, trim, or door edge reaches the wall, and a separate exposed mounting plate is not preferred. Wall mounting keeps the stop off the floor, provided the wall location offers adequate support.
Check actual installed projection and the complete swing path before selecting this model. Choose US32D-Satin Stainless Steel or US32-Bright Stainless Steel to coordinate with nearby fittings.
Installation and Replacement
Position the stop so its rubber head meets a suitable contact area on the door before other hardware strikes the wall. Avoid glass, delicate trim, and unsupported panels. Confirm the wall construction can support the mounting and repeated contact loads.
The model-specific installation instructions describe removing the rubber head to access the wood screw inside, fastening the stop to the wall, then replacing the rubber head. Follow the instructions applicable to the supplied product and use preparation appropriate to the actual screw, anchor, and wall material. Verify the supplied hardware and required hole preparation before drilling.
For replacement work, inspect the existing mounting hole and surrounding material rather than assuming the old fixing is sound. After mounting, replace the rubber head securely, open the door slowly to check contact and clearance, and verify that the stop remains secure during normal use.
Problems It Helps Address
- Door hardware striking the wall: Establishes a stopping point where reach and placement are appropriate.
- Hard contact at the stop: The rubber head cushions contact; it does not guarantee silent operation or mark-free surfaces.
- Floor obstructions: Wall mounting avoids placing a stop in the floor area.
- Exposed mounting-plate appearance: The no-plate design provides a compact mounting profile.
At an interior room doorway, a correctly positioned WSNP-04 lets the door meet the rubber head rather than allowing the handle to knock against the wall. Accurate placement, secure screw support, and a properly seated rubber head are what make the stop useful in everyday operation.
Product Details
- Part number: WSNP-04
- Type: Wall-mounted door stop, no plate
- Material: Stainless steel
- Contact surface: Rubber head / tip
- Drawing's end-view dimension: 3/4 inch; verify actual product for fit
- Listed applications: Residential and light commercial use, subject to suitable mounting and contact geometry
- Finish options: US32D-Satin Stainless Steel and US32-Bright Stainless Steel
Selection tip: Verify actual installed projection, mounting arrangement, and supplied fasteners before ordering for tight clearances or matching existing preparation. Establish installation dimensions using the applicable instructions and actual product.
Operating Considerations
The WSNP-04 is a contact stop, not a hydraulic buffer, hold-open device, or door closer. It does not regulate door speed. Inspect the rubber head and mounting during routine maintenance, and address uncontrolled door movement separately rather than relying on the stop to absorb every impact.
Installation Instructions
WSNP-04 Wall Door Stop Installation Instructions
Mounting Template
WSNP-04 Wall Door Stop Mounting Template