SLAUTOFLW4 WOOD DOOR AUTOMATIC FLUSH BOLT
SLAUTOFLW4 Self-Latching Flush Bolt Set for Wood Doors
Usually Ships in 1–3 Business Days
The Cal-Royal SLAUTOFLW4 combines a constant self-latching top flush bolt with an automatic bottom flush bolt for the inactive leaf of a compatible pair of wood doors. The manufacturer preparation document identifies these as distinct top and bottom functions. Choose US10B-Antique Bronze Oiled or US26D-Satin Chrome.
Practical Uses
- Paired wood doors: Provide the specified self-latching top and automatic bottom arrangement on a suitable inactive leaf.
- Replacement projects: Compare the existing edge preparation, guides, receivers, and active-leaf contact with the matching documents.
- Coordinated openings: Select and install with the door, frame, closers, and any required sequencing hardware as a complete system.
Everyday example: During a paired wood-door refurbishment, the installer checks the inactive leaf's preparation against the SLAUTOFLW4 template before machining. The top and bottom units are fitted according to their different functions, and both leaves are cycled to confirm self-latching, bolt engagement, release, and the intended closing sequence without forcing either door.
Installation Guidance
Keep the two functions distinct: Follow the SLAUTOFLW4 constant-latching top-bolt preparation and the accompanying AUTOFLW-22 bottom-bolt page. Do not assume the top bolt operates exactly like the automatic bottom unit.
Verify preparation and backing: Check the actual components, wood-door construction, reinforcement, edge mortises, and strike locations before cutting. A general ANSI-preparation reference is not proof of drop-in fit.
Observe housing clearance: The preparation document specifies minimum space for the bolt housing and cover. Check this and the complete guide and receiver layout against the actual door.
Align doors before adjusting: Correct hinge, track-independent door alignment, frame, and closing-sequence issues first. Bolt receivers must allow engagement and retraction without dragging.
Follow the correct fastener positions: Use the manufacturer instructions for housing, guides, and strikes. Check actual supplied hardware and do not allow an incorrect screw length to interfere with the rod or mechanism.
Test the complete opening: Check top self-latching behavior, bottom-bolt action, active-leaf contact, release, and repeated closing cycles before handover. Confirm the intended operating sequence with the specified hardware.
Problems It Helps Address
- An inactive wood leaf requires coordinated bolting: Combines a self-latching top bolt with an automatic bottom bolt.
- Preparation needs checking before replacement: Model-specific documents support accurate comparison.
- Minor vertical fit needs adjustment: Includes the listed adjustment provision within the actual hardware's limits.
Product Details
- Part number: SLAUTOFLW4
- Application: Compatible paired wood doors, inactive leaf
- Arrangement: Constant self-latching top bolt and automatic bottom bolt
- Listed construction: Steel body with stainless steel components
- Handing: Reversible, non-handed
- Listed vertical adjustment: 1 inch; verify actual projection and engagement
- Listed features: Override provision and thermal-lock mechanism
- Listed packaging: Two bolts per box with composite installation template; confirm the ordered unit and supplied components
- Selectable finishes: US10B-Antique Bronze Oiled; US26D-Satin Chrome
Selection tip: Confirm function, preparation, components, and complete-opening requirements before ordering. Existing manufacturer references to labeled wood composite-core doors up to 8 feet, UL10C, UBC 7-2-1997, and 5-pound mechanism actuation require verification against the current listing and complete assembly. They do not independently establish the installed opening's fire rating, accessibility compliance, or release performance.